The unused SFL pin at ADV749x

Document created by PaulS Employee on Sep 5, 2014
Version 1Show Document
  • View in full screen mode

Hi,

 

At our datasheet of ADV749x, we did not mention the unused SFL pin.

So, we share this information here.

If we does not use the SFL pin, this function, it can be tied to ground through a resistor(4.7K Ohm ).

 

Thank you,

 

regards,

Shinji

 

This FAQ was generated from the following discussion: The unused SFL pin at ADV749x

Attachments

    Outcomes