ADuCM350 FAQ AFE Measurement Circuit Impedance Range

Document created by balajikannan Employee on Jul 15, 2014Last modified by balajikannan Employee on Jul 16, 2014
Version 2Show Document
  • View in full screen mode

Q: Can ADuCM350 be used for measurement of capacitive load alone?

 

A: ADuCM350 cannot be used for measuring capacitive impedance alone as it would cause In-Amp loop in-stability. To maintain In-Amp stability ensure that the below two conditions are met in the circuit under measurement.

 

1.A minimum series resistance of 100 ohm.

2.The maximum frequency of the R and C combination is less than 500 K Hz.

 

i.e 1/(2*pi*R*C) =< 500 K Hz.

 

R – Series Resistance of the measurement circuit.

C – Capacitance of the measurement circuit.

Attachments

    Outcomes