LTspice on Cross Over on a new Mac. Selecting components and right clicking. I still don't get a dialog allowing me to change values

Hi DAH ,

Note that you no longer need crossover to use Windows LTspice, you can install the ported mac version directly, see the LTspice download page.

Can you be more specific with a step-by-step description about what actions you have taken and what is not working?

mike

I put a resistor on the schematic.  I right click on the resistor to change the value and nothing. happens. Sometimes the resistor will move on the schematic with no other effect.

Hi DAH , 

OK, just to check your process:

1. Press R to place resistor. Cursor changes to a resistor.
2. Left-click to place the res.
3. Press Esc to exit place component mode. Cursor changes to a pointer.
4. Right-click the body of the resistor to edit resistor. Or, right-click resistor value to edit text.

This is not working?

Which version of LTspice are you using? I would recommend using the ported mac version, though using Windows LTspice in Crossover essentially the same, just not as clean.

mike

version 26.0.2.

Following your instructions, everything works until I right click on the resistor.  the resistor just moves to the left edge of the window.  No menu

Don Hirst

Hi DAH ,

Strange indeed. Is it possible your mouse isn't mapping right-click to right-click, but instead mapping to ctrl-click?

mike

I changed the mouse settings and that seemed to work. Thanks

Don

Ah, good. 

mike