I can not reach 240ua value in the following ac-lr circuit

Question

I can not reach 240ua value in the following ac-lr circuit 
 The inductor has 33mH inductance and 65ohm resistance values. 
 Resistor has 10ohm resistance value. 
 They are connected in series with 0.5(vmax) and 10000 hertz ac source. 
 impedance value is about 2074.807 and Imax value should be about 240ua, 
 I couldn't reach that value, ltspice plotting diagram always give around 220ua.

PaulDaria · Accepted Answer

Hi MehmetAlp , 
 
 this because of the time step. LTspice is trying to provide the fastest but not so accurate result. in order to improve that you need to add a value on this section of the simulation dialog baox.

in my example, it limits the time step to 100ns, the lower this value is the slower the simulation runtime. 
 
 Regards, 
 PaulDaria)