This works with .fra, and .ac.
1. Once you have the bode plot, place the mouse cursor over the magnitude (left) axis markings, it should turn to a ruler pointer.
2. Right-click.
3. Click Don't plot…
There is no font size setting in symbol pin attributes (PINATTR), just justification and offset. The text size in settings applies to the symbol when it is placed in a schematic, not the symbol editor…
There are several ways.
Hover over the node of interest. The node name appears in the status bar at the bottom of the LTspice window.
Right-click the node/net. Choose Highlight Net.
Press Ctrl…
There are several options to return to the LTspice legacy (pre-LTspice 24) look.
Legacy Icon, legacy keyboard shortcuts, and backgrounds are all available in Settings.
Settings > Operation > Toolbar…
Overview
Although earlier versions of LTspice allowed you to change keyboard shortcuts, there was no easy way to export the entire keyboard map to share or use in another instance of LTspice, nor was…
You can use the lossy transmission line component in LTspice, as described in the Help. Or you could make your own as described here:
https://www.analog.com/en/resources/technical-articles/an-improved…
Overview
Bode plots are an important tool used in the design of control loops—including control loops for switch mode power supplies (SMPS). To simplify the creation of Bode plots, LTspice includes a…
So, you have an encrypted LTspice model for a Toshiba MOS device and you want to import that into LTspice. What do you do?
Step 1: Create a schematic file, save it, and place the model file in that directory…
If you get this error:
Try an alternate installation package available here:
Run the following installation (make sure it is from scratch on a clean machine: no AppData/Local/LTspice nor AppData…
Array of components not working in 24.x
Hi!
In LTSpice 17.4 I have used an undocumented function to easily create a lumped network.
The attached circuit is to simulate cable resonance.
Please see…
How do I …
