Simulating Dark Current in a Photodiode

On page 2 of this  datasheet

https://www.hamamatsu.com/resources/pdf/ssd/g15553_series_kird1140e.pdf

there is a "Dark current vs. reverse voltage" graph. Can the LTspiceXVII diode model simulate this dark current?

I want to avoid if possible having read off that graph a parallel current,, and come up with an equivalent series voltage source, and resistance, for every reverse bias voltage value I want to simulate.

I seek to simulate both the overall TIA design's response to laser light signal, and also the noise.

A photodiode will produce shot noise. Its signal photocurrent flows in the direction opposite to that of diode forward bias. Can LTspiceXVII be made to simulate photocurrent shot noise produced by the signal photcurrent?