Importing AD8237 spice model to LTspice XVII

Question

Hi all, 
 I've read several topics on how to import a new spice model to LTspice, but I need to import the spice module of the AD8237 (which can be found on AD site in .cir format), but nothing seems to work. I am still not able to see the component under the library list. 
 Could someone please guide me on how to do this? 
 Any kind of help would be highly appreciated.

helmuts · Accepted Answer

Hello, 
 I have made an example a few years ago for the LTspice Yahoo group. I have attached a zip-file with all the necessary files. Just unzip it and RUN the simulation. I always copy the model file and the symbol file into the folder of the schematic. 
 Best regards, Helmut 
 PS: The LTspice Yahoo group will move to groups.io, because Yahoo will terminate the user groups at the end of this year.

AD8237_test1.zip)

helmuts · Answer

Hello, 
 Often there are comments in the model file. When you open the model file AD8327.cir, you will see the information below. 
 * Not Modeled: * Temperature effects * CM SR limitation * * Parameters modeled include: * Gain * Bandwidth * Noise * CMRR vs. frequency * PSRR vs. frequency * Vosi * Ibias/Ios * Ibias vs. VCM * Ibias vs. Vdiff * Input Capacitance * Quiescent Current * Input/Output clamping * Max Diff Input limitation * Gain Error * Pulse vs. cap load 
 Yes, noise is modelled in the noise analysis. The noise analysis have to be done with the simulation command .NOISE . Please be aware that no other type of simulation, e.g. .TRAN or .AC, will contain noise.

Partner Forums

Partner Libraries

Importing AD8237 spice model to LTspice XVII