I'm trying to backup the SD that came with the ADIToF eval kit onto a new 16GB SD card. Followed the Windows example using 7-zip and balenaEtcher. Image was successfully written but cannot get the Dragonboard to boot. Hangs up from the start. I tried two ways:
1) copy contents of working Eval board SD card onto a new 16GB SD card
2) Downloaded :latest SD Card image" from link in instructions.
Both resulted in successful writes to new card, but neither worked. In both cases the Dragonboard would not boot, just hangs up. Still works fine with original SD card.
Any help or suggestions are appreciated.