i would like to know how to install the USB drivers ADB for the qualcom board ?
appreciate if you share the driver.
The USB driver is the standard one that comes in Windows so there is no need to install anything. The driver will be installed automatically when the board is connected to the PC on USB and the S3 button on the camera board is pressed.
See this user guide on how to setup the USB connection: https://github.com/analogdevicesinc/aditof_sdk/blob/master/doc/windows/user_guide.md#enable-the-usb-connection-to-the-host-pc
the suggestions you made didnt work.
after powering the boards we dont have on/off leds on the dragon board, like said in the user guide.
what could be the reason for this ?
i followed all instructions with burning the image - up to powering up, but nothing helps.
appreciate your support how to solve this issue.
Please make sure you don't have any encryption security added to the SD card when you were burning the image.
Also, did you move the boot.bin and devicetree files to the root?
Could you also check whether the DIP switch one the back side of the Dragonboard is set to "SD BOOT"?