AD-96TOF1-EBZ cannot connect to windows

xuanlunhuang

on Apr 17, 2023

Category: Hardware

Product Number: AD-96TOF1-EBZ

Software Version: v3.1.0

Hi, my two sets of AD-96TOF1-EBZ once were able to work on windows, but now they cannot connect to window and some problems occurred. Could anyone help on this?

The software and hareware I use are:

Software: aditof-demo v3.1.0 and latest SD card image

Hareware: AD-96TOF1-EBZ, DragonBoard 410c and win 10/11

Problem 1: The logs shows that it can select among the modes, but when I press the "play", it shows "Failed to get frame from device" and the GUI is stuck there and no reponse. By the way, there is also a message "Failed FindInterface (PIN_CATEGORY_PREVIEW)", what does it mean?

I tried different PCs (win 10 or 11) and different USB ports and cables, the same problem happened. How should I solve this?

Problem 2: On another set of AD-96TOF1-EBZ, I press the S3 button and the LED DS4 cannot light up. I have tried the "Truobleshooting" in Windows User Guide but it did not work. What else should I do to solve this or locate the problem?

Tags: hardware DS4 cannot light up v3.1.0 Failed to get frame from device aditof-demo AD-96TOF1-EBZ Show More

0 DNechita

on Apr 18, 2023 7:06 PM
Hi,

The message "Failed FindInterface (PIN_CATEGORY_PREVIEW)" is a false positive, meaning it shows up even for the working setups. So just ignore that.

Make sure switches S1 and S5 are configured for using AD96TOF1-EBZ with Dragonboard410c and not Raspberry PI. If you haven't tried to use Raspberry PI then your switches might be untouched and thus correctly configured. But it is worth checking their positions.

If switches are not the problem, could you try to run the GUI directly on Dragonboard410c (for further debugging)? This means you have to connect a monitor through HDMI and also a mouse and a keyboard.
Cancel
Up 0 Down

Reply

Verify Answer

Cancel
0 xuanlunhuang
on Apr 23, 2023 4:56 AM in reply to DNechita
Thanks for your reply. I tried to run directly on Dragonboard410c, the same problem "Failed to get frame from device" happened. I tried with different S5 configs and the logs are different. Here is the way how I tried it:

The first try: S5 are all set to OFF, which is the original mode of the board. After I pressed "play", it halted for a while and showed "select timeout" and "Failed to get frame from device"

The second try: I switched button 1 of S5 to ON, which is shown in the text "96 CONF" right next to S5. Is this the right setting rather than that in my try #1. In this time, the last few lines in the logs are different, which show something related to logging file. At last, the "Failed to get frame from device" also showed up.

In addition, there is also another problem, that is, after my first try, the Dragonboard started to fail in booting. Sometimes it showed nothing on the screen though the lights between two usb ports blinked and lighted up correctly. Sometimes these lights even turned off after blinking for a while.

How should I solve these? Thanks.
Cancel
Up 0 Down

Reply

Verify Answer

Cancel
0 DNechita

on May 11, 2023 5:37 AM in reply to xuanlunhuang
Hi,

I see that your laser board is different from the original setup.

You first need to make sure that your lasers are working properly.

What are the differences between your current setup and the original one?
Cancel
Up 0 Down

Reply

Verify Answer

Cancel

0 xuanlunhuang

on May 15, 2023 7:49 AM in reply to DNechita

I replace the original VCSELs with my own designed VCSELs. I think it's not the problem of the VCSELs, because it worked before. I also have another unchanged laser board and I tested it on the same 96board. The same problem "Failed to get frame from device" happened for both the original laser board and my changed one.

I copy the dmesg txt files from these two laser board, where "C3laser.txt" is from the original laser board and "OwnD3laser.txt" is from the changed one, I hope these would be helpful to locate the problem?

Fullscreen C3laser.txt Download

[    0.247390] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.247448] PTP clock support registered
[    0.247754] dmi: Firmware registration failed.
[    0.251137] Advanced Linux Sound Architecture Driver Initialized.
[    0.252396] clocksource: Switched to clocksource arch_sys_counter
[    0.252601] VFS: Disk quotas dquot_6.6.0
[    0.252682] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.253014] pnp: PnP ACPI: disabled
[    0.264098] s1: Bringing 0uV into 375000-375000uV
[    0.264616] s3: Bringing 0uV into 375000-375000uV
[    0.264903] s4: Bringing 0uV into 1800000-1800000uV
[    0.265381] l1: supplied by s3
[    0.265417] l1: Bringing 0uV into 375000-375000uV
[    0.265845] l2: supplied by s3
[    0.265896] l2: Bringing 0uV into 1200000-1200000uV
[    0.266284] l3: supplied by s3
[    0.266314] l3: Bringing 0uV into 375000-375000uV
[    0.266657] l4: supplied by s4
[    0.266687] l4: Bringing 0uV into 1750000-1750000uV
[    0.267094] l5: supplied by s4
[    0.267142] l5: Bringing 0uV into 1750000-1750000uV
[    0.267529] l6: supplied by s4
[    0.267561] l6: Bringing 0uV into 1800000-1800000uV
[    0.267895] l7: supplied by s4
[    0.267925] l7: Bringing 0uV into 1750000-1750000uV
[    0.268270] l8: Bringing 0uV into 1750000-1750000uV
[    0.268652] l9: Bringing 0uV into 1750000-1750000uV
[    0.269019] l10: Bringing 0uV into 1750000-1750000uV
[    0.269367] l11: Bringing 0uV into 1750000-1750000uV
[    0.269746] l12: Bringing 0uV into 1750000-1750000uV
[    0.270164] l13: Bringing 0uV into 1750000-1750000uV
[    0.270564] l14: Bringing 0uV into 1750000-1750000uV
[    0.270962] l15: Bringing 0uV into 1750000-1750000uV
[    0.271800] l16: Bringing 0uV into 1750000-1750000uV
[    0.276572] NET: Registered protocol family 2
[    0.276712] l17: Bringing 0uV into 3300000-3300000uV
[    0.277122] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.277209] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.277354] TCP: Hash tables configured (established 8192 bind 8192)
[    0.277420] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.277453] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.277609] NET: Registered protocol family 1
[    0.277820] l18: Bringing 0uV into 1750000-1750000uV
[    0.277946] RPC: Registered named UNIX socket transport module.
[    0.277953] RPC: Registered udp transport module.
[    0.277959] RPC: Registered tcp transport module.
[    0.277964] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.277973] PCI: CLS 0 bytes, default 128
[    0.278171] Unpacking initramfs...
[    0.278182] Initramfs unpacking failed: junk in compressed archive
[    0.278680] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.278938] kvm [1]: HYP mode not available
[    0.279930] audit: initializing netlink subsys (disabled)
[    0.279983] audit: type=2000 audit(0.271:1): initialized
[    0.280553] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.290720] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.291538] NFS: Registering the id_resolver key type
[    0.291563] Key type id_resolver registered
[    0.291569] Key type id_legacy registered
[    0.291582] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.291884] 9p: Installing v9fs 9p2000 file system support
[    0.294564] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.298680] io scheduler noop registered
[    0.298846] io scheduler cfq registered (default)
[    0.300816] libphy: mdio_driver_register: phy-bcm-ns2-pci
[    0.312355] xenfs: not registering filesystem on non-xen platform
[    0.318424] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.321044] SuperH (H)SCI(F) driver initialized
[    0.321767] msm_serial 78af000.serial: msm_serial: detected port #1
[    0.321863] msm_serial 78af000.serial: uartclk = 19200000
[    0.321924] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 137, base_baud = 1200000) is a MSM
[    0.322344] msm_serial 78b0000.serial: msm_serial: detected port #0
[    0.322414] msm_serial 78b0000.serial: uartclk = 7372800
[    0.322461] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 138, base_baud = 460800) is a MSM
[    0.322479] msm_serial: console setup on port #0
[    1.272574] console [ttyMSM0] enabled
[    1.277794] msm_serial: driver initialized
[    1.281903] [drm] Initialized
[    1.286652] irq: no irq domain found for /soc/mdss@1a00000 !
[    1.288554] irq: no irq domain found for /soc/mdss@1a00000 !
[    1.294165] clk: couldn't get parent clock 0 for /soc/mdss@1a00000/dsi@1a98000
[    1.309347] loop: module loaded
[    1.310650] hisi_sas: driver version v1.6
[    1.314823] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.316452] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[    1.344128] libphy: Fixed MDIO Bus: probed
[    1.344995] tun: Universal TUN/TAP device driver, 1.6
[    1.347104] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.354253] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.358317] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.364229] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    1.369949] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.376985] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.382449] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.390529] sky2: driver version 1.30
[    1.396965] usbcore: registered new interface driver asix
[    1.400061] usbcore: registered new interface driver ax88179_178a
[    1.405446] usbcore: registered new interface driver cdc_ether
[    1.411520] usbcore: registered new interface driver net1080
[    1.417245] usbcore: registered new interface driver cdc_subset
[    1.423067] usbcore: registered new interface driver zaurus
[    1.428724] usbcore: registered new interface driver cdc_ncm
[    1.434426] VFIO - User Level meta-driver version: 0.3
[    1.443120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.445053] ehci-pci: EHCI PCI platform driver
[    1.451633] ehci-platform: EHCI generic platform driver
[    1.456217] ehci-exynos: EHCI EXYNOS driver
[    1.461285] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    1.465449] msm_hsusb_host 78d9000.ehci: unable to find transceiver
[    1.470957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.477081] ohci-pci: OHCI PCI platform driver
[    1.483403] ohci-platform: OHCI generic platform driver
[    1.487957] ohci-exynos: OHCI EXYNOS driver
[    1.493799] usbcore: registered new interface driver usb-storage
[    1.497205] usbcore: registered new interface driver usbserial
[    1.503356] usbcore: registered new interface driver usbserial_generic
[    1.509000] usbserial: USB Serial support registered for generic
[    1.525794] usb3503 usb2513: switched to HUB mode
[    1.525813] usb3503 usb2513: usb3503_probe: probed in hub mode
[    1.531029] mousedev: PS/2 mouse device common for all mice
[    1.536118] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
[    1.541892] i2c /dev entries driver
[    1.553399] i2c_qup 78b6000.i2c: 
                tx channel not available
[    1.556493] i2c_qup 78b8000.i2c: 
                tx channel not available
[    1.563609] 3-0039 supply dvdd not found, using dummy regulator
[    1.569653] 3-0039 supply pvdd not found, using dummy regulator
[    1.575550] 3-0039 supply a2vdd not found, using dummy regulator
[    1.596964] i2c_qup 78ba000.i2c: 
                tx channel not available
[    1.600271] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[    1.604277] sdhci: Secure Digital Host Controller Interface driver
[    1.609339] sdhci: Copyright(c) Pierre Ossman
[    1.616119] Synopsys Designware Multimedia Card Interface Driver
[    1.620851] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.680413] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[    1.683021] sdhci_msm 7864900.sdhci: Got CD GPIO
[    1.744502] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[    1.747027] ledtrig-cpu: registered to indicate activity on CPUs
[    1.754786] usbcore: registered new interface driver usbhid
[    1.757488] usbhid: USB HID core driver
[    1.773094] remoteproc remoteproc0: 4080000.hexagon is available
[    1.773201] remoteproc remoteproc0: Direct firmware load for mba.mbn failed with error -2
[    1.778190] remoteproc remoteproc0: powering up 4080000.hexagon
[    1.786226] usbcore: registered new interface driver snd-usb-audio
[    1.788201] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    1.788260] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    1.788327] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    1.788441] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    1.793092] random: fast init done
[    1.793133] mmc0: new HS200 MMC card at address 0001
[    1.793635] mmcblk0: mmc0:0001 EH8EE8 7.13 GiB 
[    1.793889] mmcblk0boot0: mmc0:0001 EH8EE8 partition 1 4.00 MiB
[    1.794126] mmcblk0boot1: mmc0:0001 EH8EE8 partition 2 4.00 MiB
[    1.794358] mmcblk0rpmb: mmc0:0001 EH8EE8 partition 3 4.00 MiB
[    1.794999] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: PMIC REV: 1	 CODEC Version: 1
[    1.798380] qcom-apq8016-sbc 7702000.sound: hdmi-hifi.0 <-> Quatenary MI2S mapping ok
[    1.798538]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
[    1.799917] qcom-apq8016-sbc 7702000.sound: multicodec <-> Primary MI2S mapping ok
[    1.801284] qcom-apq8016-sbc 7702000.sound: multicodec <-> Tertiary MI2S mapping ok
[    1.806760] NET: Registered protocol family 10
[    1.807524] NET: Registered protocol family 17
[    1.807605] 9pnet: Installing 9P2000 support
[    1.807658] Key type dns_resolver registered
[    1.807808] NET: Registered protocol family 42
[    1.808547] Registered cp15_barrier emulation handler
[    1.808556] Registered setend emulation handler
[    1.809084] registered taskstats version 1
[    1.815720] msm_iommu 1f00000.qcom,iommu: invalid resource
[    1.815830] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffff000009300000, with 2 ctx banks
[    1.815848] msm_iommu 1f00000.qcom,iommu: iommu sec: pgtable size: 94208
[    1.816711] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[    1.817240] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[    1.818902] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffff000009340000, with 20 ctx banks
[    1.819469] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
[    1.819851] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[    1.820208] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[    1.820589] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
[    1.820964] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[    1.821321] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[    1.821686] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[    1.822033] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[    1.822438] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[    1.822847] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel using bank 19
[    1.823240] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bitstream using bank 20
[    1.823634] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_non_pixel using bank 21
[    1.824040] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[    1.824453] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[    1.824803] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[    1.825167] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[    1.825526] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[    1.825895] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[    1.826257] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[    1.826619] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[    1.827723] 1a00000.mdss supply vdd not found, using dummy regulator
[    1.828140] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops)
[    1.828214] 1a98000.dsi supply gdsc not found, using dummy regulator
[    1.828365] 1a98000.dsi supply gdsc not found, using dummy regulator
[    1.828951] msm 1a00000.mdss: bound 1a98000.dsi (ops dsi_ops)
[    1.828969] msm 1a00000.mdss: bound 1c00000.adreno-3xx (ops a3xx_ops)
[    1.846224] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.846226] [drm] Driver supports precise vblank timestamp query.
[    1.945433] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[    1.945947] mmcblk1: mmc1:aaaa SC16G 14.8 GiB 
[    1.950326] Alternate GPT is invalid, using primary GPT.
[    1.950364]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[    2.212159] remoteproc remoteproc0: Direct firmware load for mba.mbn failed with error -2
[    2.212167] remoteproc remoteproc0: request_firmware failed: -2
[    2.286385] Console: switching to colour frame buffer device 240x67
[    2.349126] msm 1a00000.mdss: fb0: msm frame buffer device
[    2.369503] msm_otg 78d9000.phy: OTG regs = ffff0000092bc000
[    2.478133] msm_hsusb_host 78d9000.ehci: EHCI Host Controller
[    2.478169] msm_hsusb_host 78d9000.ehci: new USB bus registered, assigned bus number 1
[    2.483276] msm_hsusb_host 78d9000.ehci: irq 149, io mem 0x078d9000
[    2.495373] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 200000000, volt: 1050000, enabled: 1. New: freq: 200000000, volt: 1050000, enabled: 1
[    2.496878] cpu cpu1: opp_list_debug_create_link: Failed to create link
[    2.511101] msm_hsusb_host 78d9000.ehci: USB 2.0 started, EHCI 1.00
[    2.511190] usb usb1: runtime PM trying to activate child device usb1 but parent (78d9000.ehci) is not active
[    2.517855] hub 1-0:1.0: USB hub found
[    2.517886] hub 1-0:1.0: 1 port detected
[    2.537548] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)
[    2.541663] cpu cpu2: opp_list_debug_create_link: Failed to create link
[    2.548314] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)
[    2.554653] cpu cpu3: opp_list_debug_create_link: Failed to create link
[    2.561592] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)
[    2.568971] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[    2.575088] hctosys: unable to open rtc device (rtc0)
[    2.581928] ALSA device list:
[    2.586498]   #0: DB410c
[    2.593216] EXT4-fs (mmcblk1p9): couldn't mount as ext3 due to feature incompatibilities
[    2.801956] EXT4-fs (mmcblk1p9): recovery complete
[    2.802685] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null)
[    2.805669] VFS: Mounted root (ext4 filesystem) on device 179:137.
[    2.817274] devtmpfs: mounted
[    2.820292] Freeing unused kernel memory: 1024K (ffff800000ec0000 - ffff800000fc0000)
[    2.844403] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
[    2.985494] systemd[1]: System time before build time, advancing clock.
[    2.993964] hub 1-1:1.0: USB hub found
[    2.994180] hub 1-1:1.0: 3 ports detected
[    3.058306] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.292446] usb 1-1.1: new low-speed USB device number 3 using msm_hsusb_host
[    3.417434] input: SEM USB Keyboard as /devices/platform/soc/78d9000.ehci/usb1/1-1/1-1.1/1-1.1:1.0/0003:1A2C:2124.0001/input/input2
[    3.573487] hid-generic 0003:1A2C:2124.0001: input: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-78d9000.ehci-1.1/input0
[    3.579497] input: SEM USB Keyboard as /devices/platform/soc/78d9000.ehci/usb1/1-1/1-1.1/1-1.1:1.1/0003:1A2C:2124.0002/input/input3
[    3.644746] hid-generic 0003:1A2C:2124.0002: input: USB HID v1.10 Device [SEM USB Keyboard] on usb-78d9000.ehci-1.1/input1
[    3.740469] usb 1-1.2: new low-speed USB device number 4 using msm_hsusb_host
[    3.783915] systemd-journald[1471]: Received request to flush runtime journal from PID 1
[    3.857940] input: SIGMACHIP Usb Mouse as /devices/platform/soc/78d9000.ehci/usb1/1-1/1-1.2/1-1.2:1.0/0003:1C4F:0048.0003/input/input4
[    3.858376] hid-generic 0003:1C4F:0048.0003: input: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-78d9000.ehci-1.2/input0
[    5.351781] coresight-replicator-qcom 824000.replicator: REPLICATOR 1.0 initialized
[    5.353757] coresight-etm4x 85c000.etm: ETM 4.0 initialized
[    5.362464] coresight-etm4x 85d000.etm: ETM 4.0 initialized
[    5.365324] coresight-etm4x 85e000.etm: ETM 4.0 initialized
[    5.373632] coresight-etm4x 85f000.etm: ETM 4.0 initialized
[    6.086898] 1c00000.adreno-3xx supply vdd not found, using dummy regulator
[    6.086986] 1c00000.adreno-3xx supply vddcx not found, using dummy regulator
[    6.094783] msm 1a00000.mdss: A306: using IOMMU
[    6.119227] adreno 1c00000.adreno-3xx: couldn't get gfx3d1_user context
[    6.119262] adreno 1c00000.adreno-3xx: couldn't get gfx3d1_priv context
[    8.081772] msm_cci 1b0c000.qcom,cci: Entity type for entity msm_cci was not initialized!
[    8.081838] msm_cci_init_gpio_params:1390 gpio count 0
[    8.153749] iommu: Adding device 1d00000.video-codec to group 0
[    8.194371]  1d00000.video-codec:firmware: assigned reserved memory node venus@89900000
[    8.349162] iommu: Adding device 1b0ac00.camss to group 1
[    9.353466] a204000.wcnss supply vddcx not found, using dummy regulator
[    9.358658] remoteproc remoteproc1: a204000.wcnss is available
[    9.363223] remoteproc remoteproc1: powering up a204000.wcnss
[    9.363248] remoteproc remoteproc1: Booting fw image wcnss.mdt, size 7260
[    9.570937] at24 0-0056: 131072 byte 24c1024 EEPROM, writable, 32 bytes/write
[    9.707763] addi903x 1-0064: addi903x_probe: Enter, i2c addr = 0x64
[    9.707837] 1b0c000.qcom,cci supply qcom,gdscr-vdd not found, using dummy regulator
[    9.714617] msm_cci_init:1015: hw_version = 0x10000008
[    9.723657] addi903x 1-0064: Reset LOW
[    9.726919] addi903x 1-0064: s_power 1
[    9.731820] addi903x 1-0064: addi903x_set_power_on
[    9.767095] addi903x 1-0064: power on complete
[    9.767118] addi903x 1-0064: AD903X detected at address 0x64
[    9.771678] addi903x 1-0064: s_power 0
[    9.806406] addi903x 1-0064: addi903x_set_power_off
[    9.821682] addi903x 1-0064: power off complete
[    9.821715] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[    9.843427] addi903x 1-0064: set_fmt: 0 640x960
[    9.890181] remoteproc remoteproc1: remote processor a204000.wcnss is now up
[   10.012294] qcom_wcnss_ctrl remoteproc1:smd-edge.WCNSS_CTRL.-1.-1: WCNSS Version 1.5 1.2
[   10.864258] addi903x 1-0064: addi903x_open: Enter
[   10.864282] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[   10.885894] addi903x 1-0064: set_fmt: 0 640x960
[   11.680332] addi903x 1-0064: addi903x_open: Enter
[   11.680358] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[   11.684192] addi903x 1-0064: set_fmt: 0 640x960
[   11.691468] addi903x 1-0064: set_fmt: 3008 640x960
[   12.440340] Bluetooth: Core ver 2.22
[   12.444546] NET: Registered protocol family 31
[   12.444570] Bluetooth: HCI device and connection manager initialized
[   12.460450] Bluetooth: HCI socket layer initialized
[   12.460481] Bluetooth: L2CAP socket layer initialized
[   12.464159] Bluetooth: SCO socket layer initialized
[   12.885669] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.885692] Bluetooth: BNEP filters: protocol multicast
[   12.891023] Bluetooth: BNEP socket layer initialized
[   13.129795] wcn36xx: mac address: 02:00:97:88:48:50
[   13.145891] msm8916-wcd-digital-codec 771c000.codec: Invalid mclk rate 19200000
[   13.149995] msm8916-wcd-digital-codec 771c000.codec: Invalid mclk rate 19200000
[   13.255274] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.272326] msm8916-wcd-digital-codec 771c000.codec: Invalid mclk rate 19200000
[   13.309910] msm8916-wcd-digital-codec 771c000.codec: Invalid mclk rate 19200000
[   13.535399] wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vRhea_GF_1.12 with 19.2MHz XO' and CRM version 'CNSS-PR-2-0-1-2-c1-00021'
[   13.535432] wcn36xx: firmware API 1.5.1.2, 41 stations, 2 bssids
[   13.551002] wcn36xx: FW Cap MCC
[   13.552713] wcn36xx: FW Cap P2P
[   13.555541] wcn36xx: FW Cap SLM_SESSIONIZATION
[   13.559065] wcn36xx: FW Cap DOT11AC_OPMODE
[   13.563611] wcn36xx: FW Cap SAP32STA
[   13.567644] wcn36xx: FW Cap TDLS
[   13.571334] wcn36xx: FW Cap P2P_GO_NOA_DECOUPLE_INIT_SCAN
[   13.574557] wcn36xx: FW Cap WLANACTIVE_OFFLOAD
[   13.579826] wcn36xx: FW Cap BEACON_OFFLOAD
[   13.584180] wcn36xx: FW Cap SCAN_OFFLOAD
[   13.588245] wcn36xx: FW Cap BCN_MISS_OFFLOAD
[   13.592058] wcn36xx: FW Cap STA_POWERSAVE
[   13.596294] wcn36xx: FW Cap STA_ADVANCED_PWRSAVE
[   13.600217] wcn36xx: FW Cap BCN_FILTER
[   13.604881] wcn36xx: FW Cap RTT
[   13.608501] wcn36xx: FW Cap RATECTRL
[   13.611467] wcn36xx: FW Cap WOW
[   13.615333] wcn36xx: FW Cap WLAN_ROAM_SCAN_OFFLOAD
[   13.618149] wcn36xx: FW Cap SPECULATIVE_PS_POLL
[   13.623029] wcn36xx: FW Cap IBSS_HEARTBEAT_OFFLOAD
[   13.627447] wcn36xx: FW Cap WLAN_SCAN_OFFLOAD
[   13.632330] wcn36xx: FW Cap WLAN_PERIODIC_TX_PTRN
[   13.636824] wcn36xx: FW Cap ADVANCE_TDLS
[   13.641600] wcn36xx: FW Cap BATCH_SCAN
[   13.644453] Bluetooth: RFCOMM TTY layer initialized
[   13.644470] Bluetooth: RFCOMM socket layer initialized
[   13.644487] Bluetooth: RFCOMM ver 1.11
[   13.659127] wcn36xx: FW Cap FW_IN_TX_PATH
[   13.662968] wcn36xx: FW Cap EXTENDED_NSOFFLOAD_SLOT
[   13.667083] wcn36xx: FW Cap CH_SWITCH_V1
[   13.671601] wcn36xx: FW Cap HT40_OBSS_SCAN
[   13.675755] wcn36xx: FW Cap UPDATE_CHANNEL_LIST
[   13.679628] wcn36xx: FW Cap WLAN_MCADDR_FLT
[   13.684058] wcn36xx: FW Cap WLAN_CH144
[   13.688196] wcn36xx: FW Cap TDLS_SCAN_COEXISTENCE
[   13.692007] wcn36xx: FW Cap LINK_LAYER_STATS_MEAS
[   13.696793] wcn36xx: FW Cap EXTENDED_SCAN
[   13.701437] wcn36xx: FW Cap DYNAMIC_WMM_PS
[   13.705398] wcn36xx: FW Cap MAC_SPOOFED_SCAN
[   13.709381] wcn36xx: FW Cap FW_STATS
[   13.713800] wcn36xx: FW Cap WPS_PRBRSP_TMPL
[   13.717353] wcn36xx: FW Cap BCN_IE_FLT_DELTA
[   13.733035] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.852292] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.124100] EXT4-fs (mmcblk0p29): recovery complete
[   18.124133] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: (null)
[   18.835126] EXT4-fs (mmcblk0p24): recovery complete
[   18.835198] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: (null)
[   19.021869] EXT4-fs (mmcblk0p23): recovery complete
[   19.021899] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
[   19.150474] EXT4-fs (mmcblk0p22): recovery complete
[   19.150504] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: (null)
[   19.278303] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   26.216728] random: crng init done
[   26.223164] addi903x 1-0064: addi903x_open: Enter
[   26.223189] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[   26.226918] addi903x 1-0064: set_fmt: 0 640x960
[   26.232719] addi903x 1-0064: get_fmt which 1
[   26.236907] addi903x 1-0064: get_fmt: 3008 640x960
[   26.241400] addi903x 1-0064: get_selection 2
[   26.245978] addi903x 1-0064: get_selection 0
[   26.250406] addi903x 1-0064: get_selection 258
[   26.254655] addi903x 1-0064: get_selection 256
[   26.301351] addi903x 1-0064: s_power 1
[   26.301374] addi903x 1-0064: addi903x_set_power_on
[   26.312003] addi903x 1-0064: power on complete
[   26.318942] addi903x 1-0064: addi903x_open: Enter
[   26.318970] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[   26.324452] addi903x 1-0064: set_fmt: 0 640x960
[   32.797633] addi903x 1-0064: get_fmt which 1
[   32.797660] addi903x 1-0064: get_fmt: 3008 640x960
[   32.802697] addi903x 1-0064: stream 1
[   32.810206] addi903x 1-0064: >> addi903x_s_ctrl
[   32.810235] addi903x 1-0064: addi903x_s_ctrl > V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY
[   33.310874] addi903x 1-0064: addi903x_set_chip_config, total successful write count 1024
[   33.310914] addi903x 1-0064: << addi903x_s_ctrl
[   33.321068] addi903x 1-0064: >> addi903x_s_ctrl
[   33.322284] addi903x 1-0064: addi903x_s_ctrl > V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY
[   33.832793] addi903x 1-0064: addi903x_set_chip_config, total successful write count 1024
[   33.832833] addi903x 1-0064: << addi903x_s_ctrl
[   33.843334] addi903x 1-0064: >> addi903x_s_ctrl
[   33.844205] addi903x 1-0064: addi903x_s_ctrl > V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY
[   34.126420] addi903x 1-0064: addi903x_set_chip_config, total successful write count 562
[   34.126458] addi903x 1-0064: << addi903x_s_ctrl
[   34.316452] addi903x 1-0064: >> addi903x_s_ctrl
[   34.316479] addi903x 1-0064: addi903x_s_ctrl > V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY
[   34.322291] addi903x 1-0064: addi903x_set_chip_config, total successful write count 5
[   34.327789] addi903x 1-0064: << addi903x_s_ctrl

Fullscreen OwnD3laser.txt Download

[    0.251117] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.251174] PTP clock support registered
[    0.251479] dmi: Firmware registration failed.
[    0.254663] Advanced Linux Sound Architecture Driver Initialized.
[    0.255714] clocksource: Switched to clocksource arch_sys_counter
[    0.255860] VFS: Disk quotas dquot_6.6.0
[    0.255912] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.256160] pnp: PnP ACPI: disabled
[    0.264140] NET: Registered protocol family 2
[    0.264661] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.264747] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.264894] TCP: Hash tables configured (established 8192 bind 8192)
[    0.264958] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.264992] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.265143] NET: Registered protocol family 1
[    0.265409] RPC: Registered named UNIX socket transport module.
[    0.265416] RPC: Registered udp transport module.
[    0.265421] RPC: Registered tcp transport module.
[    0.265426] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.265436] PCI: CLS 0 bytes, default 128
[    0.265602] Unpacking initramfs...
[    0.265614] Initramfs unpacking failed: junk in compressed archive
[    0.266113] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.266364] kvm [1]: HYP mode not available
[    0.267423] audit: initializing netlink subsys (disabled)
[    0.267463] audit: type=2000 audit(0.259:1): initialized
[    0.267530] s1: Bringing 0uV into 375000-375000uV
[    0.268083] s3: Bringing 0uV into 375000-375000uV
[    0.268108] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.268390] s4: Bringing 0uV into 1800000-1800000uV
[    0.268952] l1: supplied by s3
[    0.268984] l1: Bringing 0uV into 375000-375000uV
[    0.269437] l2: supplied by s3
[    0.269473] l2: Bringing 0uV into 1200000-1200000uV
[    0.269875] l3: supplied by s3
[    0.269927] l3: Bringing 0uV into 375000-375000uV
[    0.270285] l4: supplied by s4
[    0.270316] l4: Bringing 0uV into 1750000-1750000uV
[    0.270740] l5: supplied by s4
[    0.270775] l5: Bringing 0uV into 1750000-1750000uV
[    0.271167] l6: supplied by s4
[    0.271216] l6: Bringing 0uV into 1800000-1800000uV
[    0.271562] l7: supplied by s4
[    0.271594] l7: Bringing 0uV into 1750000-1750000uV
[    0.271978] l8: Bringing 0uV into 1750000-1750000uV
[    0.272586] l9: Bringing 0uV into 1750000-1750000uV
[    0.273063] l10: Bringing 0uV into 1750000-1750000uV
[    0.273758] l11: Bringing 0uV into 1750000-1750000uV
[    0.274193] l12: Bringing 0uV into 1750000-1750000uV
[    0.274647] l13: Bringing 0uV into 1750000-1750000uV
[    0.275094] l14: Bringing 0uV into 1750000-1750000uV
[    0.275571] l15: Bringing 0uV into 1750000-1750000uV
[    0.276436] l16: Bringing 0uV into 1750000-1750000uV
[    0.276887] l17: Bringing 0uV into 3300000-3300000uV
[    0.277901] l18: Bringing 0uV into 1750000-1750000uV
[    0.278563] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.279388] NFS: Registering the id_resolver key type
[    0.279410] Key type id_resolver registered
[    0.279416] Key type id_legacy registered
[    0.279429] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.279732] 9p: Installing v9fs 9p2000 file system support
[    0.282375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.282481] io scheduler noop registered
[    0.282646] io scheduler cfq registered (default)
[    0.284599] libphy: mdio_driver_register: phy-bcm-ns2-pci
[    0.295669] xenfs: not registering filesystem on non-xen platform
[    0.300114] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.302226] SuperH (H)SCI(F) driver initialized
[    0.302864] msm_serial 78af000.serial: msm_serial: detected port #1
[    0.302961] msm_serial 78af000.serial: uartclk = 19200000
[    0.303019] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 137, base_baud = 1200000) is a MSM
[    0.303395] msm_serial 78b0000.serial: msm_serial: detected port #0
[    0.303462] msm_serial 78b0000.serial: uartclk = 7372800
[    0.303509] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 138, base_baud = 460800) is a MSM
[    0.303526] msm_serial: console setup on port #0
[    1.253615] console [ttyMSM0] enabled
[    1.258743] msm_serial: driver initialized
[    1.262665] [drm] Initialized
[    1.267440] irq: no irq domain found for /soc/mdss@1a00000 !
[    1.269565] irq: no irq domain found for /soc/mdss@1a00000 !
[    1.275176] clk: couldn't get parent clock 0 for /soc/mdss@1a00000/dsi@1a98000
[    1.289335] loop: module loaded
[    1.290114] hisi_sas: driver version v1.6
[    1.294094] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.296299] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[    1.322325] libphy: Fixed MDIO Bus: probed
[    1.322672] tun: Universal TUN/TAP device driver, 1.6
[    1.325324] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.332073] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.336515] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.342387] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    1.348145] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.355145] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.360649] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.368686] sky2: driver version 1.30
[    1.374958] usbcore: registered new interface driver asix
[    1.378235] usbcore: registered new interface driver ax88179_178a
[    1.383608] usbcore: registered new interface driver cdc_ether
[    1.389678] usbcore: registered new interface driver net1080
[    1.395407] usbcore: registered new interface driver cdc_subset
[    1.401222] usbcore: registered new interface driver zaurus
[    1.406880] usbcore: registered new interface driver cdc_ncm
[    1.412579] VFIO - User Level meta-driver version: 0.3
[    1.420870] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.423233] ehci-pci: EHCI PCI platform driver
[    1.429791] ehci-platform: EHCI generic platform driver
[    1.434373] ehci-exynos: EHCI EXYNOS driver
[    1.439443] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    1.443648] msm_hsusb_host 78d9000.ehci: unable to find transceiver
[    1.449115] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.455279] ohci-pci: OHCI PCI platform driver
[    1.461564] ohci-platform: OHCI generic platform driver
[    1.466106] ohci-exynos: OHCI EXYNOS driver
[    1.471808] usbcore: registered new interface driver usb-storage
[    1.475309] usbcore: registered new interface driver usbserial
[    1.481519] usbcore: registered new interface driver usbserial_generic
[    1.487159] usbserial: USB Serial support registered for generic
[    1.503953] usb3503 usb2513: switched to HUB mode
[    1.503973] usb3503 usb2513: usb3503_probe: probed in hub mode
[    1.509166] mousedev: PS/2 mouse device common for all mice
[    1.514267] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
[    1.520074] i2c /dev entries driver
[    1.531556] i2c_qup 78b6000.i2c: 
                tx channel not available
[    1.534653] i2c_qup 78b8000.i2c: 
                tx channel not available
[    1.541791] 3-0039 supply dvdd not found, using dummy regulator
[    1.547812] 3-0039 supply pvdd not found, using dummy regulator
[    1.553690] 3-0039 supply a2vdd not found, using dummy regulator
[    1.575124] i2c_qup 78ba000.i2c: 
                tx channel not available
[    1.578487] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[    1.582427] sdhci: Secure Digital Host Controller Interface driver
[    1.587500] sdhci: Copyright(c) Pierre Ossman
[    1.594179] Synopsys Designware Multimedia Card Interface Driver
[    1.598845] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.655738] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[    1.656291] sdhci_msm 7864900.sdhci: Got CD GPIO
[    1.731829] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[    1.733976] ledtrig-cpu: registered to indicate activity on CPUs
[    1.747472] usbcore: registered new interface driver usbhid
[    1.747490] usbhid: USB HID core driver
[    1.763949] remoteproc remoteproc0: 4080000.hexagon is available
[    1.764150] remoteproc remoteproc0: Direct firmware load for mba.mbn failed with error -2
[    1.769105] mmc0: new HS200 MMC card at address 0001
[    1.769635] mmcblk0: mmc0:0001 EH8EE8 7.13 GiB 
[    1.769906] mmcblk0boot0: mmc0:0001 EH8EE8 partition 1 4.00 MiB
[    1.770168] mmcblk0boot1: mmc0:0001 EH8EE8 partition 2 4.00 MiB
[    1.771664] usbcore: registered new interface driver snd-usb-audio
[    1.774022] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    1.774083] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    1.774150] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    1.774227] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    1.774515] mmcblk0rpmb: mmc0:0001 EH8EE8 partition 3 4.00 MiB
[    1.774973] random: fast init done
[    1.776329]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
[    1.776646] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: PMIC REV: 1	 CODEC Version: 1
[    1.782264] qcom-apq8016-sbc 7702000.sound: hdmi-hifi.0 <-> Quatenary MI2S mapping ok
[    1.782453] qcom-apq8016-sbc 7702000.sound: multicodec <-> Primary MI2S mapping ok
[    1.782624] qcom-apq8016-sbc 7702000.sound: multicodec <-> Tertiary MI2S mapping ok
[    1.785475] NET: Registered protocol family 10
[    1.786272] NET: Registered protocol family 17
[    1.786349] 9pnet: Installing 9P2000 support
[    1.786410] Key type dns_resolver registered
[    1.786559] NET: Registered protocol family 42
[    1.792276] Registered cp15_barrier emulation handler
[    1.792285] Registered setend emulation handler
[    1.792806] registered taskstats version 1
[    1.799568] msm_iommu 1f00000.qcom,iommu: invalid resource
[    1.799679] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffff000009300000, with 2 ctx banks
[    1.799697] msm_iommu 1f00000.qcom,iommu: iommu sec: pgtable size: 94208
[    1.800608] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[    1.801032] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[    1.802675] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffff000009340000, with 20 ctx banks
[    1.803203] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
[    1.803570] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[    1.803964] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[    1.804329] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
[    1.804689] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[    1.805039] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[    1.805383] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[    1.805721] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[    1.806123] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[    1.806517] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel using bank 19
[    1.806914] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bitstream using bank 20
[    1.807301] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_non_pixel using bank 21
[    1.807686] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[    1.808214] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[    1.808572] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[    1.808927] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[    1.809274] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[    1.809619] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[    1.809963] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[    1.810309] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[    1.811432] 1a00000.mdss supply vdd not found, using dummy regulator
[    1.811885] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops)
[    1.811957] 1a98000.dsi supply gdsc not found, using dummy regulator
[    1.812109] 1a98000.dsi supply gdsc not found, using dummy regulator
[    1.812665] msm 1a00000.mdss: bound 1a98000.dsi (ops dsi_ops)
[    1.812683] msm 1a00000.mdss: bound 1c00000.adreno-3xx (ops a3xx_ops)
[    1.829947] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.829949] [drm] Driver supports precise vblank timestamp query.
[    1.833281] msm 1a00000.mdss: No connectors reported connected with modes
[    1.833289] [drm] Cannot find any crtc or sizes - going 1024x768
[    1.940785] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[    1.945319] mmcblk1: mmc1:aaaa SC16G 14.8 GiB 
[    1.949704] Alternate GPT is invalid, using primary GPT.
[    1.949744]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[    2.209831] remoteproc remoteproc0: powering up 4080000.hexagon
[    2.209884] remoteproc remoteproc0: Direct firmware load for mba.mbn failed with error -2
[    2.209890] remoteproc remoteproc0: request_firmware failed: -2
[    2.224375] Console: switching to colour frame buffer device 128x48
[    2.257308] msm 1a00000.mdss: fb0: msm frame buffer device
[    2.276807] msm_otg 78d9000.phy: OTG regs = ffff0000092fa000
[    2.385452] msm_hsusb_host 78d9000.ehci: EHCI Host Controller
[    2.385489] msm_hsusb_host 78d9000.ehci: new USB bus registered, assigned bus number 1
[    2.394595] msm_hsusb_host 78d9000.ehci: irq 149, io mem 0x078d9000
[    2.406773] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 200000000, volt: 1050000, enabled: 1. New: freq: 200000000, volt: 1050000, enabled: 1
[    2.406820] cpu cpu1: opp_list_debug_create_link: Failed to create link
[    2.419869] msm_hsusb_host 78d9000.ehci: USB 2.0 started, EHCI 1.00
[    2.419943] usb usb1: runtime PM trying to activate child device usb1 but parent (78d9000.ehci) is not active
[    2.426618] hub 1-0:1.0: USB hub found
[    2.426649] hub 1-0:1.0: 1 port detected
[    2.446313] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)
[    2.450426] cpu cpu2: opp_list_debug_create_link: Failed to create link
[    2.457079] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)
[    2.463417] cpu cpu3: opp_list_debug_create_link: Failed to create link
[    2.470357] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)
[    2.477734] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[    2.483865] hctosys: unable to open rtc device (rtc0)
[    2.490838] ALSA device list:
[    2.495265]   #0: DB410c
[    2.501970] EXT4-fs (mmcblk1p9): couldn't mount as ext3 due to feature incompatibilities
[    2.725357] EXT4-fs (mmcblk1p9): recovery complete
[    2.726042] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null)
[    2.729065] VFS: Mounted root (ext4 filesystem) on device 179:137.
[    2.740678] devtmpfs: mounted
[    2.743650] Freeing unused kernel memory: 1024K (ffff800000ec0000 - ffff800000fc0000)
[    2.751726] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
[    2.901275] hub 1-1:1.0: USB hub found
[    2.901488] hub 1-1:1.0: 3 ports detected
[    2.918374] systemd[1]: System time before build time, advancing clock.
[    2.981411] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.199773] usb 1-1.1: new low-speed USB device number 3 using msm_hsusb_host
[    3.325785] input: SEM USB Keyboard as /devices/platform/soc/78d9000.ehci/usb1/1-1/1-1.1/1-1.1:1.0/0003:1A2C:2124.0001/input/input2
[    3.401267] hid-generic 0003:1A2C:2124.0001: input: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-78d9000.ehci-1.1/input0
[    3.505734] input: SEM USB Keyboard as /devices/platform/soc/78d9000.ehci/usb1/1-1/1-1.1/1-1.1:1.1/0003:1A2C:2124.0002/input/input3
[    3.564349] hid-generic 0003:1A2C:2124.0002: input: USB HID v1.10 Device [SEM USB Keyboard] on usb-78d9000.ehci-1.1/input1
[    3.647771] usb 1-1.2: new low-speed USB device number 4 using msm_hsusb_host
[    3.765176] input: SIGMACHIP Usb Mouse as /devices/platform/soc/78d9000.ehci/usb1/1-1/1-1.2/1-1.2:1.0/0003:1C4F:0048.0003/input/input4
[    3.765602] hid-generic 0003:1C4F:0048.0003: input: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-78d9000.ehci-1.2/input0
[    3.813224] systemd-journald[1482]: Received request to flush runtime journal from PID 1
[    5.349372] coresight-etm4x 85c000.etm: ETM 4.0 initialized
[    5.350204] coresight-etm4x 85d000.etm: ETM 4.0 initialized
[    5.355434] coresight-etm4x 85e000.etm: ETM 4.0 initialized
[    5.366293] coresight-etm4x 85f000.etm: ETM 4.0 initialized
[    5.370129] coresight-replicator-qcom 824000.replicator: REPLICATOR 1.0 initialized
[    6.006390] 1c00000.adreno-3xx supply vdd not found, using dummy regulator
[    6.006498] 1c00000.adreno-3xx supply vddcx not found, using dummy regulator
[    6.012694] msm 1a00000.mdss: A306: using IOMMU
[    6.026358] adreno 1c00000.adreno-3xx: couldn't get gfx3d1_user context
[    6.026391] adreno 1c00000.adreno-3xx: couldn't get gfx3d1_priv context
[    7.320729] msm_cci 1b0c000.qcom,cci: Entity type for entity msm_cci was not initialized!
[    7.320804] msm_cci_init_gpio_params:1390 gpio count 0
[    7.420631] iommu: Adding device 1b0ac00.camss to group 0
[    7.503553] iommu: Adding device 1d00000.video-codec to group 1
[    7.506329]  1d00000.video-codec:firmware: assigned reserved memory node venus@89900000
[    8.931033] a204000.wcnss supply vddcx not found, using dummy regulator
[    8.937146] remoteproc remoteproc1: a204000.wcnss is available
[    8.941551] remoteproc remoteproc1: powering up a204000.wcnss
[    8.942355] remoteproc remoteproc1: Booting fw image wcnss.mdt, size 7260
[    9.116396] at24 0-0056: 131072 byte 24c1024 EEPROM, writable, 32 bytes/write
[    9.121198] addi903x 1-0064: addi903x_probe: Enter, i2c addr = 0x64
[    9.124755] 1b0c000.qcom,cci supply qcom,gdscr-vdd not found, using dummy regulator
[    9.131281] msm_cci_init:1015: hw_version = 0x10000008
[    9.138064] addi903x 1-0064: Reset LOW
[    9.151482] addi903x 1-0064: s_power 1
[    9.151500] addi903x 1-0064: addi903x_set_power_on
[    9.210053] addi903x 1-0064: power on complete
[    9.210076] addi903x 1-0064: AD903X detected at address 0x64
[    9.215489] addi903x 1-0064: s_power 0
[    9.219968] addi903x 1-0064: addi903x_set_power_off
[    9.263767] addi903x 1-0064: power off complete
[    9.263792] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[    9.267097] addi903x 1-0064: set_fmt: 0 640x960
[    9.450220] remoteproc remoteproc1: remote processor a204000.wcnss is now up
[    9.572311] qcom_wcnss_ctrl remoteproc1:smd-edge.WCNSS_CTRL.-1.-1: WCNSS Version 1.5 1.2
[   10.675647] addi903x 1-0064: addi903x_open: Enter
[   10.675682] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[   10.682414] addi903x 1-0064: set_fmt: 0 640x960
[   11.477550] addi903x 1-0064: addi903x_open: Enter
[   11.477577] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[   11.482872] addi903x 1-0064: set_fmt: 0 640x960
[   11.491065] addi903x 1-0064: set_fmt: 3008 640x960
[   12.808861] Bluetooth: Core ver 2.22
[   12.810757] NET: Registered protocol family 31
[   12.817181] Bluetooth: HCI device and connection manager initialized
[   12.817217] Bluetooth: HCI socket layer initialized
[   12.831412] Bluetooth: L2CAP socket layer initialized
[   12.831469] Bluetooth: SCO socket layer initialized
[   12.851539] msm8916-wcd-digital-codec 771c000.codec: Invalid mclk rate 19200000
[   12.853849] msm8916-wcd-digital-codec 771c000.codec: Invalid mclk rate 19200000
[   12.976243] msm8916-wcd-digital-codec 771c000.codec: Invalid mclk rate 19200000
[   13.014661] msm8916-wcd-digital-codec 771c000.codec: Invalid mclk rate 19200000
[   13.316536] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.316558] Bluetooth: BNEP filters: protocol multicast
[   13.321920] Bluetooth: BNEP socket layer initialized
[   13.375040] wcn36xx: mac address: 02:00:97:88:48:50
[   13.499882] Bluetooth: RFCOMM TTY layer initialized
[   13.499919] Bluetooth: RFCOMM socket layer initialized
[   13.503574] Bluetooth: RFCOMM ver 1.11
[   13.529006] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.807377] wcn36xx: firmware WLAN version 'WCN v2.0 RadioPhy vRhea_GF_1.12 with 19.2MHz XO' and CRM version 'CNSS-PR-2-0-1-2-c1-00021'
[   13.807411] wcn36xx: firmware API 1.5.1.2, 41 stations, 2 bssids
[   13.821546] wcn36xx: FW Cap MCC
[   13.825728] wcn36xx: FW Cap P2P
[   13.827543] wcn36xx: FW Cap SLM_SESSIONIZATION
[   13.831672] wcn36xx: FW Cap DOT11AC_OPMODE
[   13.835824] wcn36xx: FW Cap SAP32STA
[   13.839240] wcn36xx: FW Cap TDLS
[   13.843288] wcn36xx: FW Cap P2P_GO_NOA_DECOUPLE_INIT_SCAN
[   13.846392] wcn36xx: FW Cap WLANACTIVE_OFFLOAD
[   13.851886] wcn36xx: FW Cap BEACON_OFFLOAD
[   13.855851] wcn36xx: FW Cap SCAN_OFFLOAD
[   13.859922] wcn36xx: FW Cap BCN_MISS_OFFLOAD
[   13.864007] wcn36xx: FW Cap STA_POWERSAVE
[   13.868250] wcn36xx: FW Cap STA_ADVANCED_PWRSAVE
[   13.872182] wcn36xx: FW Cap BCN_FILTER
[   13.876863] wcn36xx: FW Cap RTT
[   13.880392] wcn36xx: FW Cap RATECTRL
[   13.883404] wcn36xx: FW Cap WOW
[   13.887257] wcn36xx: FW Cap WLAN_ROAM_SCAN_OFFLOAD
[   13.890115] wcn36xx: FW Cap SPECULATIVE_PS_POLL
[   13.894975] wcn36xx: FW Cap IBSS_HEARTBEAT_OFFLOAD
[   13.899417] wcn36xx: FW Cap WLAN_SCAN_OFFLOAD
[   13.904279] wcn36xx: FW Cap WLAN_PERIODIC_TX_PTRN
[   13.908702] wcn36xx: FW Cap ADVANCE_TDLS
[   13.913396] wcn36xx: FW Cap BATCH_SCAN
[   13.917391] wcn36xx: FW Cap FW_IN_TX_PATH
[   13.920974] wcn36xx: FW Cap EXTENDED_NSOFFLOAD_SLOT
[   13.925048] wcn36xx: FW Cap CH_SWITCH_V1
[   13.929735] wcn36xx: FW Cap HT40_OBSS_SCAN
[   13.933907] wcn36xx: FW Cap UPDATE_CHANNEL_LIST
[   13.937810] wcn36xx: FW Cap WLAN_MCADDR_FLT
[   13.942204] wcn36xx: FW Cap WLAN_CH144
[   13.946392] wcn36xx: FW Cap TDLS_SCAN_COEXISTENCE
[   13.950218] wcn36xx: FW Cap LINK_LAYER_STATS_MEAS
[   13.955006] wcn36xx: FW Cap EXTENDED_SCAN
[   13.959695] wcn36xx: FW Cap DYNAMIC_WMM_PS
[   13.963656] wcn36xx: FW Cap MAC_SPOOFED_SCAN
[   13.967661] wcn36xx: FW Cap FW_STATS
[   13.972082] wcn36xx: FW Cap WPS_PRBRSP_TMPL
[   13.975601] wcn36xx: FW Cap BCN_IE_FLT_DELTA
[   13.994435] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.137164] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.122912] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: (null)
[   18.284554] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: (null)
[   18.462600] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
[   18.596762] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: (null)
[   18.716844] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   46.596129] addi903x 1-0064: addi903x_open: Enter
[   46.596154] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[   46.599979] addi903x 1-0064: set_fmt: 0 640x960
[   46.605595] addi903x 1-0064: get_fmt which 1
[   46.609822] addi903x 1-0064: get_fmt: 3008 640x960
[   46.614383] addi903x 1-0064: get_selection 2
[   46.619004] addi903x 1-0064: get_selection 0
[   46.623381] addi903x 1-0064: get_selection 258
[   46.627617] addi903x 1-0064: get_selection 256
[   46.669630] addi903x 1-0064: s_power 1
[   46.669653] addi903x 1-0064: addi903x_set_power_on
[   46.680336] addi903x 1-0064: power on complete
[   46.688101] addi903x 1-0064: addi903x_open: Enter
[   46.688129] addi903x 1-0064: addi903x_entity_init_cfg: Enter
[   46.692246] addi903x 1-0064: set_fmt: 0 640x960
[   48.036013] random: crng init done
[   53.111399] addi903x 1-0064: get_fmt which 1
[   53.111425] addi903x 1-0064: get_fmt: 3008 640x960
[   53.114845] addi903x 1-0064: stream 1
[   53.122550] addi903x 1-0064: >> addi903x_s_ctrl
[   53.123062] addi903x 1-0064: addi903x_s_ctrl > V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY
[   53.632114] addi903x 1-0064: addi903x_set_chip_config, total successful write count 1024
[   53.632155] addi903x 1-0064: << addi903x_s_ctrl
[   53.640132] addi903x 1-0064: >> addi903x_s_ctrl
[   53.643527] addi903x 1-0064: addi903x_s_ctrl > V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY
[   54.162066] addi903x 1-0064: addi903x_set_chip_config, total successful write count 1024
[   54.162106] addi903x 1-0064: << addi903x_s_ctrl
[   54.169997] addi903x 1-0064: >> addi903x_s_ctrl
[   54.173559] addi903x 1-0064: addi903x_s_ctrl > V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY
[   54.454797] addi903x 1-0064: addi903x_set_chip_config, total successful write count 562
[   54.454835] addi903x 1-0064: << addi903x_s_ctrl
[   54.629026] addi903x 1-0064: >> addi903x_s_ctrl
[   54.629054] addi903x 1-0064: addi903x_s_ctrl > V4L2_CID_AD_DEV_SET_CHIP_CONFIG_QUERY
[   54.634850] addi903x 1-0064: addi903x_set_chip_config, total successful write count 5
[   54.640617] addi903x 1-0064: << addi903x_s_ctrl

0 xuanlunhuang
on May 22, 2023 12:04 AM in reply to DNechita
Hi,

Could you tell me how to determine whether it is the problem of the laser board or the sensor of 96boards from the dmesg logs? These logs are also posted in the previous reply.

Thanks
Cancel
Up 0 Down

Reply

Verify Answer

Cancel

Partner Forums

Partner Libraries

AD-96TOF1-EBZ cannot connect to windows