The firmware for AD-96TOF1-EBZ

The EEPROM on the AD-96TOF1-EBZ board contains calibration data and the ADDI9036 firmware for the 3 available modes (near, medium, far)

On EngineerZone we can answer specific questions about the ADDI9036 and the AD-96TOF1-EBZ, but cannot provide support  for developing custom firmware. Please contact your local Analog Devices or Arrow FAE for more information on how to get dedicated development support.

Thank you for the information.

I want to use the same firmware as the one written in that EEPROM on AD-96TOF1-EBZ board.

In such a case, your support team cannot provide the firmware and calibration data for me ?

Yes, we can provide the firmware and calibration data as they are written now in the EEPROM, but there are a few notes:

 - The  AD-96TOF1-EBZ firmware works only for this system, any changes to the system's configuration will require the firmware to change as well

- The calibration data is specific to each AD-96TOF1-EBZ system and each system is individually calibrated at production 

Thank you for the information.

I understand about firmware and calibration data.

I also think calibration data should be prepared for each system.

Therefore, I think it's difficult to develop my custom board with no help my local Analog Devices or Arrow FAE.

When I get new another questions about this topic, please let me ask you again.

Thank you for the information.

I understand about firmware and calibration data.

I also think calibration data should be prepared for each system.

Therefore, I think it's difficult to develop my custom board with no help my local Analog Devices or Arrow FAE.

When I get new another questions about this topic, please let me ask you again.