failed to read firmware from eeprom

Can you try to read the contents of the eeprom using the eeprom tool?

Firstly, make sure you build the tool by using the flag '-DWITH_TOOLS=1'. Ex: ''cmake -DDRAGONBOARD=1 -DWITH_TOOLS=1 ..'

After building the project run the tool like this:

./eeprom-tool -m -r backup.bin

If this runs ok please attach the bin here, else post here the output / error

Thanks for the suggestion.

I did run it and it worked after adding sudo to the command, I see the below  messages,

linaro@linaro-alip:~/workspace/github/aditof_sdk/build/tools/eeprom-tool$ sudo ./eeprom-tool -m -r backup.bin
WARNING: Logging before InitGoogleLogging() is written to STDERR
I0125 07:21:59.512212 4369 eeprom_tool.cpp:85] Setting connection via ON_TARGET
I0125 07:21:59.512920 4369 sensor_enumerator_dragonboard.cpp:156] Looking for sensors on the target
I0125 07:21:59.513767 4369 sensor_enumerator_dragonboard.cpp:176] Looking at: /dev/media1 for an eligible TOF camera
I0125 07:21:59.619187 4369 sensor_enumerator_dragonboard.cpp:190] Considering: /dev/media1 an eligible TOF camera
I0125 07:21:59.619457 4369 sensor_enumerator_dragonboard.cpp:176] Looking at: /dev/media0 for an eligible TOF camera
I0125 07:21:59.650869 4369 addi9036_sensor.cpp:139] Opening device
I0125 07:21:59.651070 4369 addi9036_sensor.cpp:157] Looking for the following cards:
I0125 07:21:59.651150 4369 addi9036_sensor.cpp:159] Qualcomm Camera Subsystem
I0125 07:21:59.682018 4369 eeprom_tool.cpp:147] Successfully created connection to EEPROM
I0125 07:22:00.501250 4369 cam96tof1_eeprom.cpp:59] EEPROM calibration data size 64940 bytes
E0125 07:22:06.512076 4369 cam96tof1_eeprom.cpp:74] Successfully read data from EEPROM
I0125 07:22:06.514055 4369 eeprom_tool.cpp:242] Successfully wrote data to file
I0125 07:22:06.514230 4369 eeprom_tool.cpp:207] Successfully wrote data to file from EEPROM
I0125 07:22:06.514389 4369 eeprom_tool.cpp:251] Destroyed connection

Attaching the bin file.

Yes, that message is expected, it's just an informative message (not a warning or error).

I will add some more debug messages to the uvc-gadget and get back to you with some steps to run it manually.

Could you also add this line of code:

LOG(INFO) << advertisedSensorData;

right after this line:

https://github.com/analogdevicesinc/aditof_sdk/blob/master/sdk/src/connections/usb/linux/usb_sensor_enumerator.cpp#L164

and rebuild and re-run?

DNechita

I did this, added this line to line number 165, the following message got printed on running the demo,

santosh@santosh-Latitude-E7450:~/Documents/ccd_tof/aditof_sdk/build/examples/aditof-demo$ sudo ./aditof-demo
I0128 11:31:51.989786  2562 system_impl.cpp:91] Could not create TargetSensorEnumerator because SDK is not running on target.
I0128 11:31:51.990159  2562 usb_sensor_enumerator.cpp:85] Looking for USB connected sensors
I0128 11:31:52.106590  2562 usb_sensor_enumerator.cpp:165] TEMP_SENSOR_NAME=AfeTemperature;TEMP_SENSOR_ID=0;TEMP_SENSOR_NAME=LaserTemperature;TEMP_SENSOR_ID=1;
W0128 11:31:52.177353  2562 camera_96tof1.cpp:91] Could not find 24c1024 while looking for storage for camera AD-96TOF1-EBZ
I0128 11:31:52.178059  2562 camera_96tof1.cpp:144] Initializing camera
W0128 11:31:52.178105  2562 camera_96tof1.cpp:147] Failed to initialize! Not all sensors are available
W0128 11:31:52.178287  2562 usb_depth_sensor_linux.cpp:205] Failed to set Pixel Format, error: 25(Inappropriate ioctl for device)
W0128 11:31:52.178347  2562 camera_96tof1.cpp:371] Failed to set frame type
I0128 11:31:52.297472  2562 camera_96tof1.cpp:231] Chosen mode: near
I0128 11:31:52.297523  2562 camera_96tof1.cpp:273] Camera range for mode: near is: 250 mm and 800 mm
W0128 11:31:52.297546  2562 camera_96tof1.cpp:280] Failed to read firmware from eeprom

On line 165, the expected string should have been:

STORAGE_NAME=24c1024;STORAGE_ID=0;TEMP_SENSOR_NAME=AfeTemperature;TEMP_SENSOR_ID=0;TEMP_SENSOR_NAME=LaserTemperature;TEMP_SENSOR_ID=1;

The information about storage is missing in your case and I'm not sure why. It's worth to check if uvc-gadget is sending the entire information.

I've added some more logging to uvc-gadget so could you please go to the Dragonboard, get the latest master, rebuild then go to aditof_sdk/build/apps/uvc-app/

Then, run:

./config_pipe.sh

This should start the uvc-gadget. Then, please attach here a file with the entire log.

Thanks!

I rebuilt and the uvc-gadget on the dragonboard with the updated db, the log shows it is finding the eeprom storage.

linaro@linaro-alip:~/workspace/github/aditof_sdk/build/apps/uvc-app$ ./config_pipe.sh
Opening media device /dev/media1
Enumerating entities
looking up device: 81:4
looking up device: 81:5
looking up device: 81:6
looking up device: 81:7
looking up device: 81:8
looking up device: 81:9
looking up device: 81:10
looking up device: 81:0
looking up device: 81:11
looking up device: 81:1
looking up device: 81:12
looking up device: 81:2
looking up device: 81:13
looking up device: 81:3
looking up device: 81:14
Found 15 entities
Enumerating pads and links
Setting up link 4:1 -> 7:0 [1]
Opening media device /dev/media1
Setting up link 7:1 -> 13:0 [1]
Opening media device /dev/media1
Setting up link 13:1 -> 19:0 [1]
Opening media device /dev/media1
Opening media device /dev/media1
Enumerating entities
looking up device: 81:4
looking up device: 81:5
looking up device: 81:6
looking up device: 81:7
looking up device: 81:8
looking up device: 81:9
looking up device: 81:10
looking up device: 81:0
looking up device: 81:11
looking up device: 81:1
looking up device: 81:12
looking up device: 81:2
looking up device: 81:13
looking up device: 81:3
looking up device: 81:14
Found 15 entities
Enumerating pads and links
Setting up format SBGGR12_1X12 640x960 on pad addi903x 1-0064/0
Format set: SBGGR12_1X12 640x960
Setting up format SBGGR12_1X12 640x960 on pad msm_csiphy1/0
Format set: SBGGR12_1X12 640x960
Setting up format SBGGR12_1X12 640x960 on pad msm_csid0/0
Format set: SBGGR12_1X12 640x960
Setting up format SBGGR12_1X12 640x960 on pad msm_ispif0/0
Format set: SBGGR12_1X12 640x960
Setting up format SBGGR12_1X12 640x960 on pad msm_vfe0_rdi0/0
Format set: SBGGR12_1X12 640x960
I0128 08:36:30.690810 4831 uvc-gadget.cpp:2001] ./uvc-gadget has started
I0128 08:36:30.698033 4831 uvc-gadget.cpp:2029] This UVC instance is using aditof sdk version: 2.0.0
I0128 08:36:30.698231 4831 sensor_enumerator_dragonboard.cpp:156] Looking for sensors on the target
I0128 08:36:30.698694 4831 sensor_enumerator_dragonboard.cpp:176] Looking at: /dev/media1 for an eligible TOF camera
I0128 08:36:30.775835 4831 sensor_enumerator_dragonboard.cpp:190] Considering: /dev/media1 an eligible TOF camera
I0128 08:36:30.776178 4831 sensor_enumerator_dragonboard.cpp:176] Looking at: /dev/media0 for an eligible TOF camera
I0128 08:36:30.812418 4831 uvc-gadget.cpp:2062] Storages found:
I0128 08:36:30.812608 4831 uvc-gadget.cpp:2071] 24c1024
I0128 08:36:30.812685 4831 uvc-gadget.cpp:2074] Temperature sensors found:
I0128 08:36:30.812752 4831 uvc-gadget.cpp:2083] AfeTemperature
I0128 08:36:30.812810 4831 uvc-gadget.cpp:2083] LaserTemperature
I0128 08:36:30.812850 4831 uvc-gadget.cpp:2086] Message blob about available sensors to be sent to remote:
I0128 08:36:30.812888 4831 uvc-gadget.cpp:2087] STORAGE_NAME=24c1024;STORAGE_ID=0;TEMP_SENSOR_NAME=AfeTemperature;TEMP_SENSOR_ID=0;TEMP_SENSOR_NAME=LaserTemperature;TEMP_SENSOR_ID=1;
UVC: IO method requested is USER_PTR
Number of buffers requested = 4
I0128 08:36:30.813045 4831 addi9036_sensor.cpp:139] Opening device
I0128 08:36:30.813135 4831 addi9036_sensor.cpp:157] Looking for the following cards:
I0128 08:36:30.813179 4831 addi9036_sensor.cpp:159] Qualcomm Camera Subsystem
uvc device is ci_hdrc_msm on bus gadget
uvc open succeeded, file descriptor = 9
Set parameters by user
UVC: Setting format to: YUYV 640x960
Set IO METHOD passed!
I0128 08:36:30.842564 4831 addi9036_sensor.cpp:254] Starting device 0
^CI0128 08:36:51.346691 4831 uvc-gadget.cpp:2435] ./uvc-gadget is now closing gracefully
I0128 08:36:51.347048 4831 addi9036_sensor.cpp:296] Stopping device

On the PC, could you print the bufferLength variable at this line?

github.com/.../usb_sensor_enumerator.cpp

Also, if you happen to have another USB cable, could you try it?

I suspect there is some issue with the USB cable or the port on dragonboard, right now I see the below message on the PC, it shows that the storage is found, but couldnt read back data, however if I restart the board and the PC, the data read error goes away but the eeprom storage is not found in that case, at this point if I switch back to the dragonboard by removing the USB connection the eeprom is not found on the dragonboard too. Restarting the dragonboard it all works fine again on the dragonboard.

I will check with a different cable and let you know

santosh@santosh-Latitude-E7450:~/Documents/ccd_tof/aditof_sdk/build/examples/aditof-demo$ sudo ./aditof-demo
I0128 14:56:57.010651  2297 system_impl.cpp:91] Could not create TargetSensorEnumerator because SDK is not running on target.
I0128 14:56:57.011006  2297 usb_sensor_enumerator.cpp:85] Looking for USB connected sensors
I0128 14:56:57.128046  2297 usb_sensor_enumerator.cpp:165] STORAGE_NAME=24c1024;STORAGE_ID=0;TEMP_SENSOR_NAME=AfeTemperature;TEMP_SENSOR_ID=0;TEMP_SENSOR_NAME=LaserTemperature;TEMP_SENSOR_ID=1;
I0128 14:56:57.201766  2297 camera_96tof1.cpp:144] Initializing camera
I0128 14:56:57.201841  2297 usb_depth_sensor_linux.cpp:112] Opening device
W0128 14:56:57.203191  2297 usb_linux_utils.cpp:128] Error in reading data from device, error: 2(No such file or directory)
W0128 14:56:57.203732  2297 usb_storage_linux.cpp:119] Failed to read a packet via UVC extension unit. Error: -1
W0128 14:56:57.720146  2297 usb_linux_utils.cpp:128] Error in reading data from device, error: 110(Connection timed out)
W0128 14:56:57.720253  2297 usb_linux_utils.cpp:170] Failed to read a packet via UVC extension unit
W0128 14:56:57.720290  2297 usb_storage_linux.cpp:82] Failed to read buffer through UVC extension unit. Error: -1
I0128 14:56:57.720335  2297 calibration_96tof1.cpp:164] EEPROM calibration data size 100 bytes
I0128 14:56:57.995693  2297 camera_96tof1.cpp:200] Camera initialized
W0128 14:56:57.995782  2297 calibration_96tof1.cpp:346] No intrinsics found in the device memory for key 6.000000
I0128 14:56:58.113998  2297 camera_96tof1.cpp:231] Chosen mode: near
I0128 14:56:58.114048  2297 camera_96tof1.cpp:273] Camera range for mode: near is: 250 mm and 800 mm

The issue has resolved after re flashing the SD card with a new image. I am able to run the demo on the PC now.

Thanks for the help DNechita

Glad to hear that things work now.

Glad to hear that things work now.