850nm VCSEL support for TOF camera

On the AD-96TOF1-EBZ the lens has a 940nm bandpass filter. You'll have to replace the filter or the lens to match the new frequency.

In the firmware there isn't anything specific to the VCSEL frequency, but since the VCSEL was changed it is recommended to re-calibrate the system to get the best performance. The calibration software and guide can be found here: https://github.com/analogdevicesinc/aditof_sdk/tree/master/tools/calibration-96tof1

Regards,

Andrei

Hi ACozma,

Thank you for the details shared.

Does it mean the ISATG timing program is common for both 850nm and 940nm VCSEL?

I have the same question as I am interested in swapping out the laser with some customized source. Is there any instruction on hwo to program the ISATG? 

Yes, the ISATG timing program is common for the two wavelengths.

The ISATG programming tools and instructions are not public. Please contact your local FAE or sales representative to get more information.