Hi I am using EVAL-ADTF3175D-NXZ sensor and I am getting a lot of sunlight glare. Are there any optical filters that are recommended to use with this sensor. Any help would be appreciated.
KCC's Quizzes AQQ305 about a mutual exponentiation equation
1. Quote of the month: "A train station is where a train stops. A bus station is where a bus stops. I have a work station on my desk, so..." - unknown
2. Quiz AQQ305 about finding a mutual exponential equation
Good luck, and try to be among the
View All
September Monthly Blog Quiz! Read the blog, take the quiz, and you could win a gift card
Quiz: How Well Do You Know Adaptive Power Switching?
Is your I/O module overheating? The AD74416H's Adaptive Power Switching (APS) can cut heat dissipation by up to 40% — but how well do you really understand how it works?
Read the blog first: Cooling
View All
ADTF3175
Recommended for New Designs
The ADTF3175 is a complete Time-of-Flight (ToF) module for high resolution 3D depth sensing and vision systems. Based on the ADSD3100, a 1 Megapixel CMOS...
Datasheet
ADTF3175 on Analog.com
Hi I am using EVAL-ADTF3175D-NXZ sensor and I am getting a lot of sunlight glare. Are there any optical filters that are recommended to use with this sensor. Any help would be appreciated.
Hello,
We do not have any recommendations for additional filters that would help with sunlight. Adding another filtering component would degrade the return light and affect the depth data.
If you do experiment with different filters, please note the following:
- The VCSEL on the module emits light at ~940nm
- The RX lens on the module has a bandpass filter centered at ~940nm
- The additional filter should not have a lensing effect, it should be a passthrough
Hello,
We do not have any recommendations for additional filters that would help with sunlight. Adding another filtering component would degrade the return light and affect the depth data.
If you do experiment with different filters, please note the following:
- The VCSEL on the module emits light at ~940nm
- The RX lens on the module has a bandpass filter centered at ~940nm
- The additional filter should not have a lensing effect, it should be a passthrough