10.1MHz, use P0 Pin to switch the DAC's output frequency.When the switching
time is 20us, then the DDS's output is like Figure 1. If the switching time is
2ms, then the DDS's output is Figure 2. The switching time longer, the
So seems when DDS is used in Hop Frequency application, if the switching time
shorter, the output signal's performance is worse. For DDS's quick hop
frequency applications, do you have some advice which can increase the
performance of output signal?
Is the profile pin toggle rate synchronous to the SYNC_CLK. Meaning, is the
toggle rate and SYNC_CLK at an integer ratio.
If not, that should help some.
Note, the profile pin toggle rate directly impacts the modulation index. The
modulation index will impact how the energy is spread in the spectrum.