Problem of finding complete coding part of AD5933/AD5934 which is interfacing with Arduino UNO

A week is quite short, but this might help you getting started:

Here is the diagram posted here by jtoul  quite some time ago.

jgirgis here developed a library for  the CN0349, which is based on the AD5934. 

Also Pmodia, although discontinued, still has all the necessary info and Arduino code on their website: https://reference.digilentinc.com/reference/pmod/pmodia/start .

Best of luck with your project.

Hi,

Thank you so much for your reply.

I am actually in the stage where the AD5934 IC should be tested with interfacing Arduino UNO...Can you please help me out with exact diagram and code for testing AD5934 IC with Arduino UNO.

please help me out it is very urgent.

Anugaya97 said:

exact diagram

What is not exact with the diagram from the previous post?

Anugaya97 said:

code for testing AD5934

Again, what is wrong with the links from the previous post:

https://github.com/joshagirgis/CN0349-Arduino-Based-Library - more specific to the AD5934

Example Raspberry Pi code from a Digilent Forum user - more specific to the AD5933, can be adapted for AD5934 by taking into account the differences between the chips and programming the internal clock bit in the AD5934 control register

I am afraid you would need to take it from here. Feel free to ask more specific questions.

Hi,

I have tried with all those links which you sent ..but in serial monitor it is not showing any kind of results...

Hi,

I have only AD5934 Chip with Arduino UNO nothing else i have connected....for this two also it gonna work 

Those codes require adding serial output print commands. Just use the code you found, which does output to Serial Monitor.

Nope, external oscillator delivering MCLK signal is necessary.

Hi,

I have connected to 8pin with crystal oscillator 

Hi,

I have connected to external oscillator has u mentioned but it is not even showing the results

BIM_AD5933-20220503T072902Z-001.zip
I have complied this code .....i am getting results from this....

In your earlier post you mentioned that the code above worked for you. What changed? You added the oscillator to the AD5934 and the code stopped working? Can you post the part number of your oscillator?