AD698: R3 calculation error in datasheet phase lead phase lag compensation

Q 

On the AD698 datasheet, page7, Equation (2), When Vos=5V, R4 is open, R2 is
41.7 for VOUT 0~10V
In terms of Equation (2), the R3 should be 8Kohm. But R3 is 7.02Kohm in
datasheet. There is some
mistake on it? ?Figure1?

 

A 

You are correct saying that R3 should have a value of 8 kOhm. This is probably
a mistake in the datasheet.
Attachments:
Comments
Anonymous
Related