Supply Voltage Requirements

Question

At the top of the AD5263 datasheet , it says it supports 10V to 15V single supply. 
 
 In the Electrical Characteristics section of the AD5263 datasheet , however, it says it supports 4.5V to 16.5V. 
 Can I power it from a single 5V supply and use voltages at the POT pins that go close to the rails?

ADIApproved · Accepted Answer

Hello cgervasi , Apologies for the confusion. Yes, you can operate the AD5263 with a 5 V single supply (VDD = 5 V, VSS = 0 V). For proper single‑supply operation, the VDD range at VSS = 0 V should be from 4.5 V to 16.5 V. You can also use voltages close to the rails for the POT pins. As specified in the Electrical Characteristics section, the voltage range for the resistor terminals is from VSS to VDD. Best regards, Paul)

SLA Status	Assignee	Support Status
SLA Closed. Met after 14 hours		Open

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Upcoming Learning & Events

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

SLA Information

Thread Details

Supply Voltage Requirements

Thread Summary

Before You Switch