Arduino library and sample ADC code for MAX11300PMB1

Question

I have been handed down some MAX11300PMB1 evaluation boards. I have to configure its pins as ADCs to read some voltages from an array. I have tested the eval boards with the Munich GUI and the ADCs seem to work fine (configured as 0-10V) . Now I have to interface it with Arduino over SPI so that I can record the data . But I couldn't find any suitable library, and my programming knowledge is bare minimum. I was hoping somebody could point me to a MAX11300 library and/or a sample code for using its pins as ADCs. I would appreciate the help.

KevyU1212 · Accepted Answer

Hi TAK07 , 
 I am not able to find any reference software that was developed by us using Arduino. So, the only official software and GUI will be Munich. However, I did find some open-source library and code on Github such as this: GitHub - logos-electromechanical/MAX11300Arduino: This is a library for talking to the MAX11300 from any Arduino. 
 This has not been verified by us, but it might be a good starting point for your project. 
 Best Regards, 
 Kevin)

dendalisay · Answer

HI TAK07 , 
 Only Maxim ATE products are supported on EngineerZone at this time. Over the next several months, you will see more Maxim products being supported in EngineerZone. Please visit one of the technical support pages on our newly integrated website below for assistance with Maxim Integrated products. 
 EN - https://www.analog.com/en/support/technical-support.html# CN - https://support.analog.com/zh-CN/technical-support/ JP - https://support.analog.com/ja-JP/technical-support/ 
 Hi KevyU1212 , 
 Can you help support this query if you have any details? Thanks 
 Best Regards, 
 Den

Partner Forums

Partner Libraries

Arduino library and sample ADC code for MAX11300PMB1