Hi,
If you have noise information about following case, Please let me know.
When I connect to GND both A pin and B pin, Also when I change the code from zero to mid-scale.
Best Regards,
Hi,
If you have noise information about following case, Please let me know.
When I connect to GND both A pin and B pin, Also when I change the code from zero to mid-scale.
Best Regards,
Hi,
Regarding the noise information of digipots, it would be almost the same as a resistor. You can refer to the datasheet regarding BW, which can be seen that the BW and noise is worst on midscale.
Best Regards,
Yokki
Hi,
Regarding the noise information of digipots, it would be almost the same as a resistor. You can refer to the datasheet regarding BW, which can be seen that the BW and noise is worst on midscale.
Best Regards,
Yokki