AD5750 Vsense+ and Vsense-

Question

Please excuse my ignorance, my analog side is very much rusted, working mostly on digital circuits. 
 I am using a AD5750 dual rail driver in industrial circuit. It has its voltage output on Vout and then 2 pins for Vsense+ and Vsense-. 
 The datasheets says 
 "Sense Connection for the Positive Voltage Output Load Connection " for Vsense+ and the opposite for Vsense-. 
 This is a bit unclear to me. What is meant by positive voltage output load connection. 
 Where must I connect this Vsense+ to?

to +15V 
 to Vout? 
 
 Please help me to clarify this.

ADIApproved · Accepted Answer

Hi Mikkie, 
 The +Vsense and -Vsense Pins are used for remote sensing of the load to predict and to compensate for any drops in voltage. 
 If this feature is required connect the +Vsense pin to the positive side of the load and -Vsense pin to the negative side of the load 
 Otherwise, tie the +Vsense pin to the Vout pin and -Vsense pin to GND. 
 
 Kind Regards, 
 David