• State Verified Answer
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 1404 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    









		












	
	
			
	
			
		
	
	
		

		
DAC5762R - AVss



		

			

									
					    J-MASK
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Dec 1, 2015 
				
			
			
		
    

				
		
    
		    		    
		    
		    	
			
    Hello,
    
 
    I need to generate a 0V to 10V output voltage. Is it possible not connecting AVss Pin? I had planned to connect AVss Pin to gnd but the voltage ranges from -11.4V to -16.5V and I have no negative voltages on my board.
    
 
    Thanks in advance,
    
 
    Regards,
    
 
    MASK-J
    
									
			        
		
    

				
						
        

    
    Tags: 
                                            
                 dac5762r - avss
                
                                
            
    
    
    

		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    
















    
	
    
	
    
					



			








	
	
	
	



Parents
	
      
	

    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Dec 1, 2015 2:37 PM
            
            
					
      
	
      

		
		
      
					
      Hi MASK-J,
      
 
      Are you referring to the AD5762R? If so, ADI cannot guarantee that the part will be functional if the AVSS supply requirement is not met. If you wish to work with a DAC that have a single supply operation, you may want to take a look at this pre-selected selection table of ADI's precision DACs. The AD5752R's AVSS can be connected to 0V if the output is unipolar.
      
 
      Regards,
      
 
      Mark
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
				
						
						
				
				
		
		
      
			
		
      
	
      

      

      • 

	
    



Reply

      


    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Dec 1, 2015 2:37 PM
            
            
					
      
	
      

		
		
      
					
      Hi MASK-J,
      
 
      Are you referring to the AD5762R? If so, ADI cannot guarantee that the part will be functional if the AVSS supply requirement is not met. If you wish to work with a DAC that have a single supply operation, you may want to take a look at this pre-selected selection table of ADI's precision DACs. The AD5752R's AVSS can be connected to 0V if the output is unipolar.
      
 
      Regards,
      
 
      Mark
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
				
						
						
				
				
		
		
      
			
		
      
	
      

      

      • 


    


Children
	
    No Data