Hi
We found a strange operation in our evaluation.
Reset goes high ,then we put output command right away, but Vout doesn't come up, but after 30usec or more, then it comes up..
SCLK was about 35MHz.
Does RESET restrict Vout for a certain period ?
Could you give comments?
Regards
moto
Hi moto-san,
When the part powers up either from cold or hot boot, the part reads the internal fuses and this normally takes 10s to 100s of µs. It is recommended to allow 100µs after the rising edge of…
Hi Moto-san,
I believe so, except for the AD5762R which indicated a different power-on time of 80ms.
Regards,
Mark
