AD5160 SPI parameters?

Question

Hi, 
 What would be the correct settings to send data to the AD5160 via SPI. The datasheet tells me that the clock polarity is active low (CPOL = 1) and leading edge triggered (CPHA = 0) regarding the phase. Is this correct? 
 Thanks in advance! 
 Kind regards, Samuel Lourenço

rrosario · Accepted Answer

Hi Samuel, 
 CPOL=0 since the idle state is logic 0 for SCLK. Meanwhile CPHA=0 because data is valid on the rising edge of SCLK. 
 Best regards, 
 Rainier