I design electrodrive micromotor. Micromotor supply 3 sinusoid with variable-amplitude and frequency (0-53 Hz or 0-106 Hz; 540 point on period). Configuration chanel(1 faze): DAC AD7538 with AD8675,summarizeAD8675, filter 1 or 2 degree on AD8675, power op amp OPA549E. Amplitudecontrol DAC AD7538 with AD8675(supply on Ref faze DAC chanel). /LDAC use tosimultaneous generation point sinusoid.Please verify delay your device (if delay bad, repair):-chanel(1 faze): DAC AD7538 with AD8675 (1,5mks max DAC current rise+(1/10MHz)*5=0,5mks AD8675); summarize AD8675(1/10MHz)*5=0,5mks; filter on AD8675 (1/10MHz)*5=0,5mks + setup time filter-chanel change amplitude: DAC AD7538 with AD8675 (1,5mks max DAC current rise+(1/10MHz)*5=0,5mks AD8675)What is approximately nonsimultaneous in work chanel?What is recommended for simultaneous generation point sinusoid and more qualitative generation sinusoid?Is there change input Ref resistance on change code DAC?Is there error DAC AD7538 with AD8675 through line A-G AD7538 not R-2R?AD7538 work with negative Ref?
I would like to get a clearer picture of what you want to do. With this, can you please provide a schematic diagram or a block diagram? This will really be of great help! Can you also please include the requirements and limitations of your application? Thank you.