I found no information about REFOUT decoupling in the AD5754R datasheet.
I wonder if AD5754R performance is improved by decoupling the REFOUT pin with e.g. 10uF.
Or are there any disadvantages when decoupling the REFOUT pin of the AD5754R?
Thanks in advance,Niels
In order to minimize the DAC output voltage noise a 10nF coupling capacitor can be connected to ground.
thanks for the information.
Is there a maximum limit for the capacitive load at the REFOUT pin?
Niels said:Is there a maximum limit for the capacitive load at the REFOUT pin?
This question is still open.Is there anybody out there to answer it?