I'm a bit confused about the analog input/output range of the AD5592R.
If I set Vref = 5V, and configure the ADC/DAC to 2xVref mode (set D4 and D5 of the general-purpose control register to 1), does it mean the chip is able to receive and output up to 10V signal?
Thank you very much,
If Vref=5V and configure the ADC/DAC to 2xVref mode, chip will not be able to receive input or generate output up to 10V signal. The output is limited my VDD. Only when Vref=0.5VDD you will be able to receive input or generate output up to 2xVref.