The test condition of AD390 when Iee is tested？

Hi chenzhou,

Test conditions are as follows:

+VCC=15V

-Vee=-15V

No load

DB0:DB11 = 0x800  (all 4 DACs)

Best regards,

Rainier

Thanks for the answer。

And would you tell me the state of CS1 CS1-CS4,A1,A0  while  testing the Icc ?

Is CS1=CS2=CS3=CS4=A1=A0=0？

After you have finished configuring each channel to 0x800, you should set these pins as follows when measuring the Icc:

CS1=CS2=CS=3=CS4= "1"

A1=A0= "0" or "1"