Q: What is the correct power supply sequence for the ADAS3023 to operate properly?
A: The ADAS3023 requires these five supplies: AVDD = +5V, DVDD = + 5V, VDDH = + 15V, VSSH = - 15V, and VIO = 1.8V to 5V. The user must bring up the ADAS3023 power supplies in the following sequence in order to operate it normally:
In order to operate the ADAS3023 from a + 5V single supply, the user would need to generate the required +/-15V high voltage supplies using one of our switching converters such as the ADP1613/14 in SEPIC-Cuk topology. Refer to CN-201 for complete information on this test setup.
It is a question about power supply sequence.The data sheet has an order, and the time condition is not written.Is the following sequence safe?
The whole is a single power supply system. It is designed to be powered all at once.± 15 V => (VDDH, VSSH) => 5 V LDO => AVDD => 20 Ω => DVDD => VIO