AD7778: Input signal out of specified range

Question

Accepted Answer

Question If my AD-converter above is set to work within let's say 0-2 V, what happens 
 with the output signal (10 bits) if the input signal goes under 0 V or over 2 
 V? I couldn't find it in the data sheet. I guess the converted data is invalid 
 in some way, but how long does it take to get back to normal function? I mean, 
 let's say I have a glitch that goes under 0 V for a short period, is the data 
 that follows (when input is normal) valid or invalid? Answer Exceeding the input range of the AD7778 to within the absolute max limits of 
 the part...which are specified as 
 -0.3V to Vcc+0.3V will cause the o/p code to sit at either +ve or -ve 
 full-scale.
 The input track and hold amplifier may saturate, however once the i/p voltage 
 returns to within the normal operating range, the track and hold amp will 
 acquire the new voltage in a time specified as the acquisition time..see page 2 
 of the datasheet.
 
 Exceeding the max ratings of the ADC, may cause permanent damage to the device, 
 and if there is a possibility of this occuring, then the device should be 
 protected against this occurance.
 One such method is to connect shottky diodes between the input pin and the 
 supplies, such that in the event of an overvoltage occurance, the input voltage 
 is clampled to 0.3V outside the supplies.
 A series resistor should be included to limit the current in this condition.

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

Products Mentioned

AD7778: FAQ

Before You Switch