EVAL-AD4630-24FMCZ Rev E - how to get?

Hi lingvo /Artem,

Thank you for your interest in evaluating the AD4630-24. The board being distributed from Mouser and Digikey is the latest revision for the layout, which is Revision D. The Revision E that you see in the design files of the EVAL-AD4630-24FMCZ is for the update on the schematic, which is mainly revision for the library used internally and didn't affect the layout. Old evaluation boards (Revision C for board layout) are already obsolete. The images from Mouser and Digikey are just representation for the product, and you'll notice it is not updated. The image that you can see in the product webpage is the latest board as shown below.

Thanks and Regards,
Francis

Thanks. Will order then.

Hi Francis

Unfortunately it doesn't seem to be true, at least not for all kits or distributors. I have ordered one EVAL-AD4630-24-KTZ from Digikey (Link https://www.digikey.de/de/products/detail/analog-devices-inc/eval-ad4630-24-ktz/17119564), and inside I have found old EVAL-AD463X-A Revision board .

I have also ordered one EVAL-AD4630-24FMCZ (I needed two eval boards for some tests) from https://www.digikey.de/de/products/detail/analog-devices-inc/eval-ad4630-24fmcz/15848927 and this one was the new revision. 

The Date Code on old Eval board was however 2514 on new one is 2542. Are these much worse than D Revision? I don't like to mess with two different versions. Can I exchange the older board somehow?

Hi lingvo ,

Apologies for that as I focused entirely on the EVAL-AD4630-24FMCZ. With the EVAL-AD4630-24-KTZ, which has the Zed Board in the package, you can still use the EVAL-AD463X-A board. In terms of performance, they are identical, so there's no need to worry about one being worse than the other.

Regards,
Francis