Category: Datasheet/Specs
Product Number: AD4052
Hello,
the pin description states for the CNV: Convert Input. In sample mode, averaging mode, and burst averaging mode, a rising edge on the CNV pin initiates a conversion. The CNV pin can optionally be connected to CS. See the Serial Interface section
I could not find any information about this in the Serial Interface section.
In sample mode it is described: The digital host must wait for the maximum tCONV delay before asserting CS and reading the result over the SPI.
How can i use the device when connecting CNV and CS? At the moment the data read in sample mode always reads 0.
Best regards.
