AD5941
Recommended for New Designs
The AD5940 and AD5941 are high precision, low power analog front ends (AFEs) designed for portable applications that require high precision, electrochemical...
Datasheet
AD5941 on Analog.com
Hello Team
1) I am using CN0510 EIS measurement board for Battery Impedance testing with NCR18650 Li-ion MH12210 Battery, but i am getting unexpected results. Is my setup is correct and is the set parameters are correct ?
Help needed.
P1 is of SensorPal GUI result, P2 is of Setup. Please resolve the issue.
2) I am using IAR Workbench for Firmware Development IDE and use Example given in the Github for AD5941 and that successfully build and also generated the Hex file as shown in P4 (P3 of generated of Hex file),and i flash the hex file using the Daplink drive (Drag and Drop) and also with crossover serial flash programmer and the hex is also successfully loaded in ADIcup3029 Board.
3)I also updated the firmware using SensorPal GUI , can you please elaborate how this update from GUI works P5.
4) Please Guide me on how can i get the proper results using CN0510, if study material is available.
