ADXL1002
Recommended for New Designs
The ADXL1001/ADXL1002 deliver ultralow noise density over an extended frequency range with two full-scale range options, and are optimized for industrial...
Datasheet
ADXL1002 on Analog.com
AD7760
Production
The AD7760 is a high performance, 24-bit S-? analog-to-digital converter (ADC). It combines wide input bandwidth and high speed with the benefits of S...
Datasheet
AD7760 on Analog.com
Hi,
Anyone could confirm the interfacing between ADXL1002 accelerometer sensor with AD7760EDZ evaluation kit - any other accessories needed to read the data into the PC apart from these two components?
Hi Scientist ,
You can connect to the EVAL-AD7760EDZ in stand alone mode, provided there are interface connections, or using the EVAL-CED1Z. Please take note of some compatibility considerations as shown below.

EVAL-AD7760 page: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/eval-ad7760.html
User Guide: https://www.analog.com/media/en/technical-documentation/user-guides/EVAL-AD7760EDZ_7762EDZ_UG-593.pdf
Thanks,
Janine
To interface the ADXL1002 with the AD7760EDZ, you’ll need an ADC driver for proper signal conditioning. Apart from that, a compatible data acquisition system or microcontroller will be needed to read the data into your PC. You may also require some jumper wires or connectors depending on your setup.