This webinar will introduce remote-controlled edge nodes and how they promise to simplify the automotive network architecture and expedite the integration...
1. Quote of the week: "Knowledge is knowing a tomato is a fruit. Wisdom is not putting it in a fruit salad" - unknown Sources: commons.wikimedia...
Quiz! Read the GMSL Link Lock Blog - Take the Quiz and You are Entered to Win! Important: Read the blog first . The quiz questions are all based on...
The Limitation of Heat Dissipation IO-Link is used across many branches of factory automation, and in these applications, areas of the factory floor...
Imagine a scenario where you have a brand-new board design or are excited to try out some evaluation kits only to find out that the two devices can’t talk...
Technical articles. Blogs. Videos. Your ADI content, all in one place.
Blurb About Content
AD74413R Recommended for New Designs The AD74413R is a quad-channel software configurable input/output solution for building and process control applications. The AD74413R contains functionality... Datasheet AD74413R on Analog.com
Can the analog input and output of the AD74413R chip accept -10~10V, or output -10V to 10V?
Hi,
AD74413R is unipolar part and does not support negative output or it does not measure negative voltages. Range 0V to 10V would be supported.
When it comes to acceptance: AD74413R IO ports are usually limited by chosen TVS, absolute maximum rating is shown in the Datasheet (https://www.analog.com/media/en/technical-documentation/data-sheets/AD74413R.pdf), and should not exceed +- 50V.
Regards,
Arnost
Other models can support bipolar input and output (-10V to 10V)
