ad7768-1 CONTINUOUS CONVERSION

Question

On the data sheet page 55 second column row 7 said: Continuous conversion mode is not available as an option for use with the low ripple FIR filter. 
 So, continuous mode is not for FIR filter?

JCCillion · Accepted Answer

Hi Kenneth43 , 
 We will look into this. I will contact the product owner and get back to you. 
 Regards, 
 JC)

JEstayo · Answer

Hi Kenneth, 
 
 Continuous mode conversion can be used for FIR Filter. 
 The statement should be &ldquo; One Shot conversion mode is not available as an option for use with the low ripple FIR Filter.&rdquo; One shot conversion mode is only available for use with sinc5 or sinc3 filters. We are working on the correction of the datasheet. 
 
 To answer your second question, yes. A reset can be performed by writing 0xAD on the SDI when in continuous read mode and in the same way as the exit command. It is not a data for SYNC_RESET but a reset code/command.

Regards, 
 Janine

Partner Forums

Partner Libraries

Products Mentioned

Associated Drivers

ad7768-1 CONTINUOUS CONVERSION