EVAL-AD7768-1 external power


What are the power requirements on the J6 connector (pin voltages) to power the EVAL-AD7768-1 when the VINSEL jumper is set to A (i.e. power input from Connector P6)?  Does both J6 and J5 require the various power rails to have the EVAL-AD7768-1 fully functional? 

I have tested the EVAL-AD7768-1 board when the EVAL-SDP-CH1Z is used, but I'd to test it without the EVAL-SDP-CH1Z plugged in.



Parents Reply Children
No Data