Please help me on this "NO DEVICES FOUND" Eval-AD7608SDZ with EVA-SDP-CB1Z linking problem.
I follow the given procedure to install the system.
1. Install the AD7608 evaluation board software.
2. Connect the Eval-AD7608SDZ and EVA-SDP-CB1Z together via the 120-way connector.
Apply power to the Eval-AD7608SDZ via +9 V, 18 W power supply provided. At this stage, the green LED labeled Power on the EVAL-CED1Z is lit.
3. Connect the USB cable between the PC and the EVA-SDP-CB1Z.
Althrough the "status' LED on the EVA-SDP-CB1Z board no lights up, the device manager (Win7) is able to detect the "Analog Devices System Demostration Platform SDP-B"
4. After starting the EVAL-AD7608 software, the error message below is shown. I have tried to press the RESET button and redo the entire procedure many times, but the problem remains.
Did you use the installer found on its product page?]
This thread is handled offline.
hello ,yang, I have the same problems with you :NO device found, have you solved this problem?
I have the same problem with yang ,could you please help me solve this ?