AD698 LVDT Signal Conditioner

Question

Is the AD698 effectively a 12-bit device? 
 By this I mean can I connect it to a higher resolution ADC or are the effective number of 
 bits limited by the analog design of the AD698? 
 Is there a way to make higher resolution LVDT signal conditioners? 
 Thanks, 
 Dan

EZAdministrator · Accepted Answer

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum. Thank you, EZ Admin)

jcolao · Answer

Hi Dan, 
 The ability of the signal conditioner to perceive changes on the sensor output signal will limit the resolution of the system. To reduce noise in the system, you can do oversampling and get an average output result from the AD698 but this comes with expense in system bandwidth. The accuracy will be affected by accuracy, gain and drift spec. The AD698 linearity spec typically at 75ppm will have an 13.7 bit accuracy, the worst would be at 500ppm which is a 11 bit accuracy. 
 Regards, 
 Jonathan

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Upcoming Learning & Events

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

Products Mentioned

Thread Details

AD698 LVDT Signal Conditioner

Before You Switch