Dear support team,I work with the AD7175-2 BRUZ. In the data sheet is:
SETUP CONFIGURATION REGISTER 0 / Bit 12 = 0 -> UNIPOLAR / Bit 12 = 1 -> BIPOLAR
For me it works the other way. Is that possible?
I use a 5V reference voltage source (ADR445BRZ).
AVDD1/AVDD2 = 5V
AVSS = 0V
I too have the same problem. Please share the resolution with me: email@example.com
May I know exactly how did you verified the scenario? How did you configured the register? Are you using the evaluation software or you generate your own code? The part should work as stated in the datasheet. Bit 1 for Bipolar and Bit 0 for unipolar.