HelloI'm trying to set up communication with AD7091R-8. In setup I send following SPI command: 0X0CFF, 0X08FF, 0XFFFF, 0XFFFF, 0X00FF. Then I periodically send 0X0020 and I'm trying to read channel 5. I'd like to read one channeland them sequential readings. I inserted pictures from the logic analyzer into the attachment. I guess I'm getting bad data. Could you help me.
I have little progress. I can set the MUX, but when sending 0x0C40 I would expect switching to channel 6 but A / D will switch to channel 5. This is verified by hardware (changing the voltage…