I have a question from a customer about effective noise bandwidth of AD7175-8 and AD7176-2.
In the datasheet for LTC2444, EFFECTIVE NOISE BW is presented in table-8.
The customer need to know the same parameter to estimete SNR of his system.
Could you please present the effective noise band width of AD7175-8 and AD7176-2 ?
Thank you for your suggestion and advice.
I feel a combination of "minimum oversampling ratio" configuration and custom decimation filter will be better solution.
I would like…
Thank you for your support.
This application is about cardiography and the noise level requirement is too small.
> The AD717x is designed for dc type of application.
From the ideal of this customer, he thinks the best way is to bypass the sinc filters.If it is able to , the customer will make and tune the original decimation filter on FPGA.
Is AD7175-8 able to baypass the sinc filter ?