I am using the DC2390A-A evaluation board for the LTC2500-32 ADC with the Arrow/Terasic SoCkit Cyclone V FPGA evaluation board. I cannot find the design files for the Arrow/Terasic SoCkit evaluation board for use with the DC2390A-A. I am in need of the design files to program the Cyclone V FPGA of the SoCkit evaluation board so that I can evaluate the LTC2500-32 on the DC2390A-A evaluation board.
I can't even find the pinout information for the DC2390A-A evaluation board! So at this point, the DC2390A-A evaluation board is useless.
Thank you for any assistance with this issue!
The DC2390A-A schematic is here: https://www.analog.com/media/en/technical-documentation/eval-board-schematic/DC2390A4-SCH.PDF
The SoCkit board files are here: http://www.analog.com/media/en/evaluation-boards-kits/evaluation-software/LT_SoCkit_latest_SDcard_image.zip
Thank you for your response. The SoCkit board file that you linked only provides the SD card image for the bootable Linux-based OS for the HPS of the Cyclone V FPGA of the SoCkit board.
Can you also provide the files to configure the FPGA of the SoCkit for use with the DC2390A-A?
The updated file was renamed to DC2390_full_datapath_test_oldclient.py
You will find it in the new Python directory in the llt\app_examples\ltc2500_family directory.
It appears that some progress has been made. I am able to successfully run script "DC2390_full_datapath_test_oldclient.py", but the outputs are not meaningful and the message "Address out of range. Must be less than 0x100000" frequently appears as shown in the attached screenshot.
Also, the majority of the other scripts included in the "\linear_lab_tools64\python\llt\app_examples\ltc2500_family" directory do not run, while the few that do successfully run do not output meaningful information. I can provide the associated screenshots if they are useful on your end.
Thank you for your continued support!
When running DC2390_full_datapath_test_oldclient.py do you have the DC2390 DAC outputs connected to the ADC inputs?
Yes, as per the DC2390A Demo Manual. And all jumpers are at their default positions.