I am using AD7765 EVAL Board with Artix-7 FPGA board.
MCLK - 40MHz on board crystal available on EVAL AD7765 Board.
DEC Rate - 128x with ODR = 156.2kHz.
I am giving 1VDC input from voltage source to Pin 2 (+ve) and Pin 3 (-ve) of J1 Connector on AD7765 EVAL board.
I am getting 10 samples, 24 bit count like this:
How do I convert this count to get input voltage?
ADC is working in Normal mode with default gain of 1.25.
I figure that out.
sampled voltage = ( 3.2768V / 2^23 ) * ADC Count.