Category: Software
I'm trying to interface the ADAS1000 eval board with the SAM E54 Xplained Pro Eval board.
I took the below No OS driver code and added its functions and program flow into my project.
https://wiki.analog.com/_media/resources/tools-software/uc-drivers/renesas/adas1000_rx62n.zip
In the Init part I'm setting the SPI parameters. doing software reset, Setting Inactive Frame Words as 0 and setting the frame rate.
Then I'm trying to read the CMREFCTL register using the "ADAS1000_GetRegisterValue" function. The register value always returns as 0.
MCU Eval Board: SAM E54 Xplained Pro
AFE Eval board: ADAS1000SDZ
SPI Configurations:
- SPI Data order - MSB first
- SPI Speed - 1,300,000 Hz
- Data character size - 8 bits
- Phase - Data sampled on leading edge and changed on trailing SCK edge
- Polarity - SCK is high when idle
Framerate set is 2KHz.
Kindly, help me sort this issue. Thanks
