MAX19777AZA+: FAQ

Was this helpful?

Does the MAX19777 update the output on every falling clock edge?

The ADC data is stable during a time period after every SCLK falling edge . The DOUT data is not known immediately at SCLK falling edge; it requires up to 23ns for conversion. During that time period …
How is possible that the DOUT propagation delay is larger than the clock period in the MAX19777, can it work at 3Msps?

In page number 5 of the MAX19777 datasheet, Figure 1 shows the timing diagram where the DOUT data timing parameters t7 and t4 together with the SCLK period, define the interval where stable DOUT should…

Forums