MAX1343BETX+: FAQ

Was this helpful?

How do I configure the GPIO ports on the MAX1343?

The MAX1343 features four GPIO pins: GPIOA0, GPIOA1, GPIOC0, GPIOC1. To program the GPIO ports, two 16-bit commands are required. The first command goes to the GPIO Configuration register, which sets each…
How do I set up the DAC output on the MAX1343?

The MAX1343 internal 8-channel DAC needs to be enabled through register commands before the DAC output become active. Each DAC can be turned on individually, or groups of the DAC channels can be enabled…
How do I use an external reference on the MAX1343?

The operation of the references used by the MAX1343 depend on the clock mode, type of conversion, and whether the ADC or DAC are in use. Regardless of clock mode, temperature conversions are performed…

Forums