Hello,
I want to use AD9175 eval board using ACE Software.I donot have ADS7-V2,so I power the AD9175 eval boaed by a lab supply.
This is my ACE settings：
I can't detect a signal at 1.9875Ghz with spectrograph.
By reading "AD917x-FMC-EBZ Evaluation Board User Guide",I get some guesses and questions about not getting a signal.Hope you can point out my mistakes.
1.How do I know if the ACE is attached to AD9175 Evaluation Board?
At first I thought ACE had detected the Board because of this:
Now I doubt it.Because :
There is no responed when I click "Read SERDES Status".
Can you tell me how to ensure that ACE and AD9175 Evaluation Board are connected?
2.Do I have any problems with the ACE setup？
My requirement is to output a 1.9875GHz signal using NCO only mode.I use HMC7044 to provide the clock for the DAC.For other Settings,we see the first two images above.In my understanding,JESD links are not required when NCO only mode is used.I don't know much about JESD Mode Settings, will it affect my use of NCO only mode?
Can you point out my ACE setting errors?
