AD9119 clocking with ADF4350

Question

Figure 148 in AD9119 datasheet shows a possible signal chain for the clock path base on ADF4350 PLL usage. 
 Figure 22 in ADF4350 datasheet shows the PLL output stage. 
 In my opinion, biasing is missing on the ADF4350 side since its output stage do not include any pullup resistors. Unless Figure 22 is complete? Or I misunderstand something? 
 AD9737A datasheet shows usage of ADF4350 as well in figure 174. Biasing is provided. That looks good to me. 
 Comparing figure 173 and 174 brings me one question: is there any reason to have the 100 ohms resistor on one side or the other of the ac-coupling capacitors? 
 Thanks for your assistance, 
 Frédéric

EZAdministrator · Accepted Answer

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum. Thank you, EZ Admin)

danf · Answer

You are right that the pull up inductors need to be there for the ADF4350. I would put the 100 ohms resistor on the AD9119 side of the coupling caps.

Partner Forums

Partner Libraries

Products Mentioned

Associated Drivers

Associated Drivers

Associated Drivers

AD9119 clocking with ADF4350