I have a question and request about AD9993-EBZ evaluation board from our customer.Our customer purchased AD9993-EBZ but the evaluation kit did not include CD-ROM.We checked the Wiki site for evaluation board, but we could not find the files which are stored in the CD-ROM.And I could not download the "Quick Start Guide" from the Wiki site becouse the link was lost. https://wiki.analog.com/resources/eval/dpg/eval-ad9993#files_included_in_the_ad9993_update
Q1. The attached pdf is a "Quick Start Guide" that the customer obtained somewhere. Is this guide a newer version ?
Q2. According to the page 4 of this Quick Start Guide, we need some files from the CD-ROM. 4. Copy “ADF4351_RevB_C_D1.exe” to your PC from the CD included in the box with your AD9993-EBZ. This is a lab view executable used to program the ADF4351 synthesizer ICs on the board.
6. Copy “single_channel.vac” and “fpga_dig_top_PHASE-SHIFT_n70.bin” from the CD in the box with the AD9993-EBZ to your PC. These files are used by Visual Analog to produce the ADC analyzer display shown in Figure 10.
7. Copy AD9993_intclk_adc_dac.mgp from the CD. This macro file is used by the SPI Controller to program the AD9993 on chip registers.
Would you please tell me how can I obtain these files ?
Q3. Do we need more files to operate AD9993-EBZ ? If we need more files please let me know.
It is an urgent request from our customer.
After you complete step 1 of the initial setup, all the files in your list above will be in the directory C:\Program Files (x86)\Analog Devices\HSDAC\AD9993 on your computer.